no. feedback is needed to regulate the temperature
A Closed loop system basically will have a feedback which enables the rectification of the error in the main process,whereas it is not possible in an open loop system
closed loop system
An open loop traffic signal just cycles on a schedule and has no "knowledge" of traffic patterns or current traffic. A closed loop system would have sensors letting it know when traffic was present and a controller that would make decisions based on the traffic conditions.
A: DEFINITELY NOT Open loop is defined as no feedback. any kind of negative feedback will reduce the gain
A closed loop system is one where the ouput of the system is at least part of the input. In a refrigerator, the output of the cooling system (the cold air inside the refrigerator) is measured, and is fed back into the system to determine whether the system needs to continue cooling. An example of a fridge that was an open loop system would be one that turns on and cools for 1 hour every 6 hours, regardless of internal temperature.
microwave uses an open loop system microwave oven that simply runs for a given time and then stops. It does not care if the food if OK, raw or burnt!
The system without feedback is known as open loop system. The examples of the open loop system are bread toaster, oven ,washing machine. The open loop systems are inaccurate & less complex.
The sensitivity of an open loop control system is always 1, it is due to no feedback involved in open loop.
The open loop system is simple and economicaleasier to constructstable
A Closed loop system basically will have a feedback which enables the rectification of the error in the main process,whereas it is not possible in an open loop system
closed loop system
no.
loop checking is perform before cable termination..the difference between a close loop and open loop is,tha close loop has a feedback while the open loop has not.
yes
A: By definition there is no control on a system in an open loop situation. simply . it has no feedback
no they have double loop circulatory system but the difference is that they have single ventricle.
An open loop traffic signal just cycles on a schedule and has no "knowledge" of traffic patterns or current traffic. A closed loop system would have sensors letting it know when traffic was present and a controller that would make decisions based on the traffic conditions.