0
What else can I help you with?
What is the term for conductance?
Conductance is the inverse of resistance. The abbreviation is the mho, which is ohm spelled backward. The symbol is the upside down Omega symbol.
If the resistance of a resistor is 6 ohms what is the conductance?
(1/6) ohm-1
What is the time constant of a 47 ohm resistor and a 47 microfarad capacitor?
The time-constant is the resistance times the capacitance, so that's 47 x 47 and because the capacitance is in microfarads, the answer is in microseconds.
If a 1 ohm resistor is parallel with a 100 ohm resister what's the total resistance?
If two 1-ohm resistors are connected in parallel, their resistance is 0.5 ohms. If they are connected in series, their resistance is 2 ohms. It is not possible to connect only two resistors in series parallel.
What is the conductance of a circuit that has ten ohm resistance?
0.1 mhosmhos = 1 / ohmsAnother Answer'Conductance' is the reciprocal of resistance, and its SI unit of measurement is the siemens (symbol: S). The 'mho', its former unit, has not been used since the 1960s. So the answer is 0.1 S.
What is the conductance of a 100 ohm's resistor?
0.01 siemens.
What is the conductance of a 10 ohm's resistor?
Conductance is the reciprocal of resistance, and is measured in siemens (S). So a 5.1 ohm resistor has 1/5.1 conductance, which is approximately 0.196 078 431 372 549 019 607 843 137 254 9 S.
How do you test a ballast resistor?
ohm the resister with a multimeter
What is the term for conductance?
Conductance is the inverse of resistance. The abbreviation is the mho, which is ohm spelled backward. The symbol is the upside down Omega symbol.
If the resistance of a resistor is 6 ohms what is the conductance?
(1/6) ohm-1
What is the Si unit of conductance equal to the reciprocal of an ohm names after the German industrialist who invented it?
Siemens
How do you work out amps of current from 230V connected to 534 ohm resister?
you divide the volts by the ohms
Using ohm's law express conductance in terms of current and voltage?
Conductance (G) is the reciprocal of resistance (R), expressed as G = 1/R. According to Ohm's Law, resistance is equal to voltage (V) divided by current (I), so R = V/I. Therefore, conductance can be expressed as G = I/V.
What is conductance measured in?
The SI unit for conductivity is the siemens per metre. Conductivity is the reciprocal of resistivity, whose SI unit is the ohm metre.
What is the DC current running through an 18 ohm resister at 90 volts?
5 amps. Use Ohm's Law: I = V/R = 90/18 = 5
How do you test a ballast resister on a 72 Mercedes?
Put an ohm meter accross it and read the resistance, or turn on the ign for about a minuet and feel the resister, but be careful they can get quite hot though if their working.
What is the Si unit of Electrical conductance?
The SI unit of electrical conductance is the siemens, symbolized as "S." One siemens is defined as the reciprocal of one ohm, which is the unit of electrical resistance. Conductance quantifies how easily electricity flows through a material, and it is commonly used in electrical engineering and physics.
