V=RI or I = V/R so I = 0.4/100=0.004A or 4mA
8v
12
2500 mA
8
Potential Difference across a resistor is given by, Potential Difference = Resistance * Current = 1500 * 0.075 = 112.5 Volts
Your question reveals fundamental misunderstandings about the nature of electricity.'Voltage' is simply another word for 'potential difference', and a potential difference appears across opposite ends of the resistor; it doesn't 'travel through' that resistor! Current, on the other hand, DOES 'travel through' the resistor and is caused by the potential difference across the resistor.Resistance is the ratio of potential difference to current. So if the resistance remians unchanged when the current through it doubles, then it has happened because the potential difference has doubled.
A possible/probable unit is Watts.
The current in each.
If a 9.0 volt battery is connected to a 4.0-ohm and 5.0-ohm resistor connected in series, the current in the circuit is 1.0 amperes. If a 9.0 volt battery is connected to a 4.0-ohm and 5.0-ohm resistor connected in parallel, the current in the circuit is 0.5 amperes.
The potential difference accross the resistor changes mainly due to gradual increase accumulation of electrons in the lower potential region which will in turn affect the potential gradient as the current flows through the resistor
Potential Difference across a resistor is given by, Potential Difference = Resistance * Current = 1500 * 0.075 = 112.5 Volts
Your question reveals fundamental misunderstandings about the nature of electricity.'Voltage' is simply another word for 'potential difference', and a potential difference appears across opposite ends of the resistor; it doesn't 'travel through' that resistor! Current, on the other hand, DOES 'travel through' the resistor and is caused by the potential difference across the resistor.Resistance is the ratio of potential difference to current. So if the resistance remians unchanged when the current through it doubles, then it has happened because the potential difference has doubled.
Work it out yourself. PD=P/I, Where PD=Potential Difference, P=Power & I=Current
Potential difference equals current multiplied by resistance or E = IR therefore the answer to your question is 25 volts
No current flows when the the voltage is zero.
22ma. E=R/I
Resistance (Ohms) = Potential Difference (Volts) / Current (Amps) So, 12/0.25 = 48 Ohms.
A possible/probable unit is Watts.
The current in each.
A variable resistor usually has three terminals, one of which is connected to the 'wiper' by which means its resistance is measured. By using all three terminals, we can control the potential difference in a circuit. When used in this way, we call the variable resistor a 'potentiometer'. By using two of the three terminals, one of which must be connected to the variable wiper, we can control the current passing through circuit. When used in this way, we call the variable resistor a 'rheostat'.
Use Ohm's Law, i.e., V=IR here, V=voltage I=current R=resistance