0
What else can I help you with?
What is the time constant of a .05 microfarad capacitor and a 200 kilo ohm resistor connected in series?
The time constant of a 0.05 microfarad capacitor and a 200 K ohm resistor in series is simply their product, 0.05 times 200,000, or 10,000 microseconds, or 10 milliseconds. (Farads times ohms = seconds)
What is one time constant of a 4.7 μF capacitor in series with a 22 kΩ resistor?
The time constant of a 4.7 µF capacitor in series with a 22 KΩ resistor is about 103 ms.
What will happen to the other resistor if the number of resistor decreases?
the voltage across that resistor will increase if it is in series with the other resistors. the current through that resistor will increase if it is in parallel with the other resistors.
What are the laws of series and parallel connection?
1.In series connection the total resistance is equal the total number of resistor that was connected in series 2.the current is constant in a series connection 3.in a series connection total voltage is equal the number of of volt per cells
What is the net resistance of two resistor connected in series?
The net resistance of two resistors connected in series is the sum of the two resistances. RSERIES = Summation1toN RN
What ia series circuit?
A circuit in which elements are connected in series.For example in RLC series circuit resistor,inductor and capacitor are connected in series.
What are the difference between rl and RC circuit?
RL circuit consists of a resistor and an inductor connected in series, while an RC circuit consists of a resistor and a capacitor connected in series. In an RL circuit, the time constant is determined by the resistance and inductance, while in an RC circuit, the time constant is determined by the resistance and capacitance. RL circuits respond to changes in current, while RC circuits respond to changes in voltage.
What is the phase angle of an ohm inductor in series with an ohm resistor connected to a 5 KHz source?
You need to provide values of resistor and inductor etc to find the phase angle.
What is the time constant of a 20 mH inductor in series with a 230 W resistor?
t = L/R
What circumstances is it possible for the rms current drawn from a certain source to have the same magnitude when an inductance is connected in series with a given impedance?
The same as what? when an inductor is connected in series with a resistor and a current passed through them, the voltages across the resistor and inductor are equal when the reactance is equal to the resistance: 2.pi.f.L = R
What is the time constant of a 0.001 microfarad capacitor and a 15000 ohm resistor connected in series in a dc circuit?
The same as the time constant of a 2.7 microfarad capacitor and a 33 ohm resistor connected in series.
What is the time constant of a 20mH inductor in series with a 230 ohm resistor?
Simple...(20*10-3)/230=869 microseconds
Why a inductor is used in series before diode instead of resistor?
An inductor will supply better current source.
What is the time constant of a 50mH inductor in series with a 200 ohm resistor?
The time constant (τ) of a circuit consisting of an inductor (L) and a resistor (R) in series is given by the formula τ = L/R. In this case, with L = 50mH and R = 200 ohms, the time constant would be τ = (50mH) / (200 ohms) = 0.25 milliseconds.
What is the purpose of a resistor connected in the series with the load resistor?
Divide the voltage
A 3 V battery is connected in series with a resistor and an inductor The series circuit has a time constant of 532ms and the maximum current is 262 mA What is the value of the inductance?
The final current is E/R = 0.262 = 3/R.R = 3/0.262 ( = 11.45 ohms ).The time constant is RL = 0.532.L = 0.532 / R = (0.532) / (3/0.262) = (0.532) (0.262) / 3= 46.46 millihenrys (rounded)
How do you calculate the time constant in a series resistor?
A resistor by itself has no time constant. For a circuit to have a time constant it must contain either capacitors or inductors.
