A series reactor is connected in series with a power system component, such as a transmission line or generator, to limit short-circuit currents and manage voltage drop during load fluctuations. In contrast, a shunt reactor is connected in parallel to the system, primarily used to absorb reactive power, improve voltage stability, and mitigate voltage rise in long transmission lines under light load conditions. Essentially, series reactors focus on current limiting, while shunt reactors focus on reactive power management.
If you are placing more than one resistors in series, then its combined resistance is higher than when you place these resistors in shunt.
the basic difference is ,in short shunt motor the series field winding wont carry any current under no load condition whereas in long shunt motors series winding will carry no load current.....
An ordinary amplifier can have high gain but is unstable, drifts, can oscillate, etc. An amplifier with negative feedback has lower gain but is stable, does not drift, won't oscillate, etc.
In long shunt the shunt field winding is in parallel to both generator and series field. In short shunt the shunt field is in parallel to generator only.
aster
Basic voltage regulators are classified as either SERIES or SHUNT, depending on the location or position of the regulating element(s) in relation to the circuit load resistance.
One is a capacitor and one is a reactor. Shunted capacitors are used to raise th voltage in the power system, while shunt reactors are used to lower it. Capacitors are typically installed close to load because of this; reactors are typically on very high power lines where the capacitance of the power line can cause severe overvoltages when loading is light, and at large generating stations.
It works with two reactor coils for excitation of the field reactor coil , which in turn provides current to the field. The two reactor coils are connected in shunt and series with the output of the generator stator or armature ( from where load is connected).
The difference between a separately excited DC generator and a Shunt DC generator is that for a separately excited Dc generator , the excitation field winding is supplied by an external source different from that supplying the armature while for shunt generator, the excitation field windind is connected in series with the armature and supplied by a single source.
A shunt is a passage between blood vessels which diverts blood. A stent is used to prop open an artery.
If you are placing more than one resistors in series, then its combined resistance is higher than when you place these resistors in shunt.
A shunt reactor absorbs reactive power and increases the energy efficiency of any system. It is a small device used for power compensation in high voltage transmission lines and cable systems.
series controller, shunt controller,series-shunt controller,series-series controller
An AV shunt is surgically implanted. An internal fistula is an abnormality that develops in tissues/between areas of anatomy.
the basic difference is ,in short shunt motor the series field winding wont carry any current under no load condition whereas in long shunt motors series winding will carry no load current.....
everything
a shunt coil needs external supply & tripping coil gets supply from itself.