0
Ohm's Law states that the current (I) flowing through a conductor between two points is directly proportional to the voltage (V) across the two points and inversely proportional to the resistance (R) of the conductor. This relationship is mathematically expressed as ( V = I \times R ). A simple sketch to illustrate this would show a circuit with a battery (voltage source), a resistor, and a flow of current, with labeled values for V, I, and R. The derivation can be highlighted as rearranging the formula to find current as ( I = \frac{V}{R} ) or resistance as ( R = \frac{V}{I} ).
What else can I help you with?
What is the difference between Ohms and Ohms CT in impedance of an audio transformer?
The difference in between Ohms and Ohms CT is that in Ohms CT it has CT at the end.
How is 0.016 k ohms stated?
0.016 k ohms can be stated as 16 ohms. This is because "k" stands for kilo, which is a factor of 1,000, so 0.016 k ohms is equivalent to 0.016 × 1,000 ohms. Therefore, 0.016 k ohms = 16 ohms.
How do you calculate 1.67 ohms?
ohms law.
What is the total resistance of a 6-ohm resistor and a 12-ohm resistor in a parallel series?
In series like so ---6 ohms ---- 12 ohms --- , the total resistance is just 6 ohms + 12 ohms.assuming you mean in parallel like this:_|---6 ohms-----|-|~|-_|---12 ohms---|then the resistance of this can be calculated like so:1/6 ohms + 1/12 ohms = 1/R (where R is the resistance of the circuit as a whole)2/12 ohms + 1/12 ohms = 1/R3/12 ohms = 1/R1/4 ohms = 1/Rso R = 4 ohmsA few notes, if the resistors are in parallel the total resistance will always be less than or equal to the lowest resistance in parallel (i.e 6 ohms in parallel with 12 ohms will have resistance less than 6 ohms).Also if two resistances in parallel are the same, then the resistance is half of the resistance of both resistors (i.e. 1/2 ohms + 1/2 ohms = 1/R; 1 = 1/R, R=1 ohm which is half of 2 ohms).This process can be extended to 2 or more resistors in parallel.i.e if we had a 6 ohm, 6 ohm and 12 ohm resistor in parallel we could go1/6 ohms + 1/6 ohms + 1/12 ohms = 1/R(1/6 ohms + 1/6 ohms) + 1/12 ohms = 1/R1/3 ohms + 1/12 ohms = 1/R4/12ohms + 1/12 ohms = 1/R5/12 ohms = 1/Rso R = 12/5 ohms or 2.4 ohms
Does 17200 ohms equal 17.2K ohms?
yes.
Does the diode satisfy ohms law Explain?
no
What is the formula for finding current?
See OHMS LAW on the internet with a search engine. It will explain everything.
What is the difference between Ohms and Ohms CT in impedance of an audio transformer?
The difference in between Ohms and Ohms CT is that in Ohms CT it has CT at the end.
What is 3000 ohms in k ohms?
3000 ohms are 3 kiloohms.
What is 97 k ohms in ohms?
97 k ohms is equivalent to 97,000 ohms. Just multiply the value in kiloohms by 1,000 to convert it to ohms.
Do multiply or divide convert kohms to ohms?
Ohms are smaller than k-ohms, so number of ohms must be a bigger number. Multiply k-ohms by 1,000 to get the same resistance in ohms.
What is the OHMS rating of an 87 Suzuki Samurai gas tank sending unit?
135 ohms new, and will function properly down to 114 ohms. The chart in the '86-'87 book shows: Empty=110 ohms +/- 7 ohms Full=3 ohms +/- 2 ohms 1/2 full= 32.5 ohms +/- 4 ohms
How do you convert ohms to mega ohms?
A Megohm is one million ohms. To convert ohms to Megohms, divide by one million.
How is 0.016 k ohms stated?
0.016 k ohms can be stated as 16 ohms. This is because "k" stands for kilo, which is a factor of 1,000, so 0.016 k ohms is equivalent to 0.016 × 1,000 ohms. Therefore, 0.016 k ohms = 16 ohms.
Whats the difference between 2 ohms and 4 ohms?
2 ohms of resistance
What is the total resistance of a series circuit with 5ohms10 ohms 20 ohms?
35 ohms
What is the amount of resistance perfoot in a secondary spark plug wire?
Here is what I go by, 0 - 15" min 3000 ohms, max 10000 ohms. 15 - 25" min 4000 ohms, max 15000 ohms. 25 - 35" min 6000 ohms, max 20000 ohms. Over 35" min 8000 ohms, max 25000 ohms.
