answersLogoWhite

0

What else can I help you with?

Continue Learning about Engineering
Related Questions

What is the phase difference between the current through the resistor and inductor in an AC circuit?

The phase difference between the current through the resistor and inductor in an AC circuit is 90 degrees.


What component limits current in a circuit?

A resistor or an inductor. The inductor limits transient current, not steady state current.


What circumstances is it possible for the rms current drawn from a certain source to have the same magnitude when an inductance is connected in series with a given impedance?

The same as what? when an inductor is connected in series with a resistor and a current passed through them, the voltages across the resistor and inductor are equal when the reactance is equal to the resistance: 2.pi.f.L = R


What is the relationship of current through the resistor and inductor in the LR parallel circuit?

When they are in parallel the same voltage appear across both. The resistor carries a current of V/R, the inductor carries a current of V/(jwL). So the current in the inductor is 90 degrees behind in its phase.


When an inductor and resistor are connected in parallel by how many degrees is the current flow through the resistor out of phase with the current flow through the inductor?

When a resistor and an inductor are both connected to an AC supply, the current in the resistor is in phase with the voltage, while the current in the inductor is a quarter-cycle (90 degrees) behind. Supposing they both draw 1 amp on a 12-volt AC supply. The resistor will dissipate 12 watts, while the inductor will dissipate no power. Any power that enters the inductor comes back to the generator in a later part of the cycle. But the current drawn from the supply is 1.414 amps, so this would be a load with a power factor of 0.707.


Why a inductor is used in series before diode instead of resistor?

An inductor will supply better current source.


How does ohm's law works in a resistor circuit?

Ohm's law states that voltage is resistance times current. In a resistor circuit, knowing two of voltage, current, or resistance, you can calculate the third.Actually, this applies to any circuit, be it resistor, capacitor, or inductor. Ohm's law still applies - it just gets more complex when the phase angle of current is not the same as the phase angle of voltage.


What is working principle of inductor?

A changing current through an inductor induces a voltage into the inductor, the direction of which always opposes the change in that current.So, in a d.c. circuit, an inductor will oppose (not prevent) any rise or fall in current, although the magnitude of that current will be determined by the resistance of that inductor, not by its inductance.In an a.c. circuit, because the current is continuously changing both in magnitude and in direction, it acts to continuously oppose the current due to its inductive reactance. Inductive reactance is proportional to the inductance of the inductor and the frequency of the supply. The vector sum of the inductive reactance of the inductor and the resistance of the inductor, is termed the impedance of the inductor. Inductive reactance, resistance, and impedance are each measured in ohms.


Why is there no flow of electric current between 2 objects of equal resistance?

I am not sure how the two objects of equal resistance are supposed to be connected. But for a current to flow, for example across a resistor, there must be a voltage difference between the terminals of this resistor.


What are the difference between rl and RC circuit?

RL circuit consists of a resistor and an inductor connected in series, while an RC circuit consists of a resistor and a capacitor connected in series. In an RL circuit, the time constant is determined by the resistance and inductance, while in an RC circuit, the time constant is determined by the resistance and capacitance. RL circuits respond to changes in current, while RC circuits respond to changes in voltage.


Inductor works in direct current?

Yes, an inductor works with direct current. It is called an electromagnet. Of course, a practical electromagnet has series resistance, otherwise the current in the inductor would increase to the limit of the current/voltage source.


What is the difference between resistance and insulation?

Resistor is a current a insulator is a not conductive and conductors can conduct.