You have a 3-phase UPS consuming 60kVA at 400V,
So, to determine the current per phase, apply the following formula:
I= S / (U x sqrt[3]) where S is apparent power (in VA)
U is line voltage (in V)
I is current per phase (in A)
thus, this gives I= 60 000/ (400 x sqrt[3])
I=86.6 amps
The formula you are looking for is I = W/E. Amps = Watts/Volts.
The voltage can be either 250000 kilovolts or 240 volts, it can't be both so the question can't be answered. <<>> There are zero amps in 250,000,000 volts. Amps can be found using the following equations. Amps = Volts/Resistance in ohms, Amps = Watts/Volts and Amps = Sq root of Watts/Resistance in ohms.
It depends on how many Amps (current) are applied to the voltage. Watt = Volts x Amps. e.g. 12 volts @ 5 amps = 60 watts
depends what the source voltage isone horsepower equals to 746watts (assuming 100% efficiency)746 watts divided by voltage source equals current (amps)AnswerIn countries, such as the USA, where the horsepower is still used as a means of measuring power, it is always used to measure the output power of a motor.So, in order to determine the current drawn by the motor, you will first need to find out its input power. The input power is the output power divided by the machine's efficiency. Once you know its input power, then you can find its current by dividing the input power by the supply voltage. In practise, you will need to use a wattmeter to determine its input power.
You cannot convert 2.6 kw to amps with that information only. In order to convert watts to amps, you also need to know either current or voltage. This is because watts is volts times amps, and volts is current times resistance
For a single phase circuit, the equation you are looking for is I = W/E. Amps = Watts/Volts.
75 Amps theoretically Need to know if the generator is 3 phase or single phase.
The equation that you are looking for is Amps = Watts/Volts. There are 6000 watts in 6kW.
500,000 watts/240 volts = 2,083.34 Amps (single phase)
The formula you are looking for is I = W/E. Amps = Watts/Volts.
The formula you are looking for is I = W/E. Amps = Watts/Volts.
Rephrase your question, as it doesn't make any sense. If the primary side of the transformer is 480 volts 3 phase, this transformer can be supplied from a breaker as big as 180 amps. If 480 volts 3 phase is your secondary then you can supply up to 180 amps to your loads.
50 kVA is 16.667 kVA per phase and you divide that by the phase voltage. Current = 16667 / 277 = 60 Amps
160 amps at 12v.
160 amps at 12v.
Ohm's law: Volts = Amps * Ohms, or Amps = Volts / Ohms 12 volts / 0.5 ohms = 24 amps
The formula you are looking for is , A = kva x 1000/Volts.