No way of telling. to get amps you have to have a current flow, which you get when you connect a consumer to an outlet. Then the consumer will pull amps according to its wattage rating (Watts / Volts = amps) - assuming it's all hooked to a fuse with enough rating.
In SI, the 'volt' is a special name given to a joule per coulomb.
In SI, the coulomb is a special name given to an ampere second, in much the same way that a watt is a special name for a joule per second.
The relationship between resistance and capacitance in a clc circuit is the capacitive reactance given by XC.
It may work in several different ways, depending on the actual circuit used. As asked no better answer can be given than the circuit board alternately turns the current in the LED on and off.
To protect the wiring from overheating and catching on fire.AnswerThe term, 'switchgear', describes a variety of switching devices including circuit breakers and isolators (disconnects).A circuit breaker is an overcurrent protection device. Overcurrents are overload currents (due to too much load for a given circuit) or short-circuit currents (due to electrical faults).
119 joules per coulombCharges don't get joules as they flow through a circuit. They lose them.Every coulomb of charge that flows through a circuit ... from one terminal of a119-volt power supply, around the circuit, and back to the other terminal ...loses 119 joules during the trip.
In a 120-volt circuit, each coulomb of charge flowing receives 120 joules of energy. This is calculated using the formula: energy = voltage x charge. So, 120V x 1C = 120 joules.
The mathematical relationship between charge (q) and the Coulomb force (F) is given by Coulomb's Law, which states that the magnitude of the force between two point charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. Mathematically, this relationship is expressed as F = k(q1*q2)/r^2, where F is the Coulomb force, q1 and q2 are the charges, r is the distance between the charges, and k is the Coulomb constant.
<p><p> Voltage = 6 V Charge = 1 C Current * Time = Charge V * t = Q Energy = Current * Voltage * Time E = VIt E = Q * V E = 1 C * 6 V E = 6 Joules Therefore energy given to each coulomb of chare passing through 6 V battery is 6 Joules . Cheers !
The potential difference ('voltage') is equal to the work done per unit charge, i.e. the energy given to each Coulomb of charge. So, a six Volt battery provides six Joules of energy to each Coulomb of charge.
1.5 volts means 1.5 joules/coloumb.
By definition a volt is a joule per coulomb, V=W/Q (V is voltage, W is work done or energy measured in joules, Q is charge measured in coulombs) therefore 1 volt is 1 joule per 1 coulomb of charge (1C of charge is a very large amount to expect to see very small numbers for charge)
The magnitude formula for the electric force between two point charges is given by Coulomb's law: F = k * |q1 * q2| / r^2, where F is the electric force, k is Coulomb's constant, q1 and q2 are the magnitudes of the charges, and r is the distance between the charges.
The Coulomb electric force equation is given by F = k * |q1 * q2| / r^2, where F is the force between two point charges q1 and q2 separated by a distance r, and k is the Coulomb constant.
Coulomb's law describes the electrostatic force between two charged objects. The mathematical equation is given by ( F = k \frac{|q_1 q_2|}{r^2} ), where ( F ) is the magnitude of the force between the charges, ( k ) is Coulomb's constant, ( q_1 ) and ( q_2 ) are the magnitudes of the charges, and ( r ) is the distance between the centers of the two charges. This law states that the force is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.
Each Coulomb of charge passing through a 6V battery gains 6 Joules of energy. This can be calculated using the formula Energy = Charge x Voltage. So, for every Coulomb of charge passing through a 6V battery, it receives 6 Joules of energy.
According to Coulomb's law, the force between two charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. Mathematically, the force (F) is given by F = k * (q1 * q2) / r^2, where q1 and q2 are the magnitudes of the two charges, r is the distance between them, and k is the Coulomb's constant.