Ohm's Law: voltage = current x resistance. The SI units involved are the following:
ohms is the unit of resistance while volts is the unit of voltage
An ohm is a unit of electrical resistance. A kilohm is 1,000 ohms resistance, while a megohm is 1,000,000 ohms resistance.
In series like so ---6 ohms ---- 12 ohms --- , the total resistance is just 6 ohms + 12 ohms.assuming you mean in parallel like this:_|---6 ohms-----|-|~|-_|---12 ohms---|then the resistance of this can be calculated like so:1/6 ohms + 1/12 ohms = 1/R (where R is the resistance of the circuit as a whole)2/12 ohms + 1/12 ohms = 1/R3/12 ohms = 1/R1/4 ohms = 1/Rso R = 4 ohmsA few notes, if the resistors are in parallel the total resistance will always be less than or equal to the lowest resistance in parallel (i.e 6 ohms in parallel with 12 ohms will have resistance less than 6 ohms).Also if two resistances in parallel are the same, then the resistance is half of the resistance of both resistors (i.e. 1/2 ohms + 1/2 ohms = 1/R; 1 = 1/R, R=1 ohm which is half of 2 ohms).This process can be extended to 2 or more resistors in parallel.i.e if we had a 6 ohm, 6 ohm and 12 ohm resistor in parallel we could go1/6 ohms + 1/6 ohms + 1/12 ohms = 1/R(1/6 ohms + 1/6 ohms) + 1/12 ohms = 1/R1/3 ohms + 1/12 ohms = 1/R4/12ohms + 1/12 ohms = 1/R5/12 ohms = 1/Rso R = 12/5 ohms or 2.4 ohms
Resistance is measured in Ohms.Resistance is measured in Ohms.Resistance is measured in Ohms.Resistance is measured in Ohms.
ohm
the answer is ohms
Georg Ohms.
The unit of resistance is ohms, the unit of conductance (1 / resistance) is siemens. 1/R = S, or alternately R = 1/S.
ohms is the unit of resistance while volts is the unit of voltage
2600 ohms.
An ohm is a unit of electrical resistance. A kilohm is 1,000 ohms resistance, while a megohm is 1,000,000 ohms resistance.
Ohms
135 ohms new, and will function properly down to 114 ohms. The chart in the '86-'87 book shows: Empty=110 ohms +/- 7 ohms Full=3 ohms +/- 2 ohms 1/2 full= 32.5 ohms +/- 4 ohms
ohms
ohms
The base unit of resistance is measured in ohms.
ohms is the SI unit of resistance MHO (siemens) is the SI unit of reciprocal of resistance ie conductance