answersLogoWhite

0

A stator support is a structural component in electric machines, such as motors and generators, that holds and stabilizes the stator, the stationary part of the machine. It ensures proper alignment and mechanical integrity of the stator windings and core, facilitating efficient electromagnetic operation. The design and material of the stator support can influence the overall performance, thermal management, and durability of the machine.

User Avatar

AnswerBot

3w ago

What else can I help you with?

Continue Learning about Engineering

What type of motor has a stator?

An electric motor has a stator and a rotor. The stator does not move. The rotor rotates inside the stator.


How do you check stator on trx300?

To check the stator on a Honda TRX300, first disconnect the battery and remove the stator cover to access the stator assembly. Use a multimeter to measure the resistance across the stator's winding terminals; compare your readings to the specifications in the service manual. Additionally, inspect for any physical damage or signs of overheating. If the readings are out of spec or if there is visible damage, the stator may need to be replaced.


How energy is transferred from stator to rotor?

when current is passing through the stator windings of motor magnetic field is develop ,due to it emf is produced inside the stator windings,that emf is further cuts the emf across stator due to which current flowing inside the rotor.


How do you test a stator on a skidoo?

To test a stator on a Ski-Doo, first, disconnect the electrical connectors and use a multimeter to measure the resistance between the stator's windings. Check for continuity between the windings and ensure there's no short to ground by measuring resistance from the windings to the stator case. Additionally, you can test the output voltage by starting the engine and measuring the AC voltage at the stator's output wires, comparing it to the manufacturer’s specifications. If the readings are outside the specified range, the stator may need replacement.


What does stator mean in Spanish?

The Spanish word for "stator" (motor part) is estator. But the word is also used for an "estate" of land.

Related Questions

What type of motor has a stator?

An electric motor has a stator and a rotor. The stator does not move. The rotor rotates inside the stator.


Cr 125 stator ohms?

Looking for coil ohms and stator ohms. And possibly the voltage comming out of the stator .


How do you remove a stator virago xv1100?

To remove the stator from a Yamaha Virago XV1100, first disconnect the battery and remove the right side cover to access the stator. Next, unplug the stator connectors and remove the bolts securing the stator to the engine case. Carefully lift the stator out, ensuring that no wires are damaged in the process. Finally, inspect the area for any debris or damage before installing a new stator if necessary.


How many stator poles are used for battery charging when using the 3A stator system?

On a 1.25 A charging Stator it only has 2 poles. Now on a 3A charging Stator it has 4 poles for the charging. And both have 6 poles for Lighting Stator. So always remember that.


How to Wind the stator of an AC machine?

How ti wind the stator of an ac machine


Where is the magneto on a ATV?

It is actually the stator or flywheel, the coils in the stator is the magneto which is under the flywheel


Where is stator on 1990 evinrude?

The stator on an Evinrude outboard is located under the engine flywheel.


Where is the stator located on 2001 Corolla?

A stator can be found in electric motors, generators and alternators.


How do you check stator on trx300?

To check the stator on a Honda TRX300, first disconnect the battery and remove the stator cover to access the stator assembly. Use a multimeter to measure the resistance across the stator's winding terminals; compare your readings to the specifications in the service manual. Additionally, inspect for any physical damage or signs of overheating. If the readings are out of spec or if there is visible damage, the stator may need to be replaced.


What do you understand about the stator of an AC motor?

AC motor has two main winding components - stator and a rotor. Stator winding is stationary where as rotor winding is on rotating part.


How do you check the stator timing on your ktm 85?

To check the stator timing on a KTM 85, first remove the stator cover to access the stator plate. Align the timing mark on the flywheel with the pointer on the stator casing at the specified timing setting (usually around 2.0 mm BTDC). Use a dial gauge or a timing light to ensure the ignition timing is correct. Make any necessary adjustments by loosening the stator screws and rotating the stator plate, then recheck the timing before reassembling.


How do you get the stator out of a 750 Kawasaki vulcan engine?

To remove the stator from a 750 Kawasaki Vulcan engine, first disconnect the battery and remove any necessary covers to access the stator. Then, detach the stator’s wiring harness and unscrew the bolts securing the stator to the engine case. Carefully lift the stator out, ensuring you don’t damage any surrounding components. Always refer to the service manual for specific torque specifications and procedures.