0
What else can I help you with?
How do you separate engine oil that has contaminaated a barrel of rainwater?
To separate engine oil from a barrel of rainwater, you can allow the mixture to sit undisturbed for some time, enabling the oil to rise to the surface due to its lower density. Once the oil has formed a layer on top, use a siphon or a pump to carefully remove the oil without disturbing the water beneath. Additionally, you can use absorbent materials, such as oil-absorbent pads or booms, to soak up residual oil on the water’s surface. Always ensure proper disposal of the contaminated oil according to local regulations.
Is coal and oil being formed faster than humans are using it?
Really and truly, coal and oil aren't being created fast enough for human use. Coal is most likely not to be used that often; since not everyone is burning coal, we have plenty of it. Oil is a different story. Since we use oil, sometimes in our daily lives, it has to be produced more often the coal, because me use it so much!
What is the difference between filtered oil and refined oil?
For refining the oil, there are three basic processes in the refinery. First process is neutralizing the oil in the neutralizer to remove the Free Fatty Acids (FFA) by adding caustic soda. Oil is heated upto about 60°C by thermic fluid coils and oil is stirred by stirrer. Then soap stock formed due to chemical reaction is allowed to settle at the bottom of the neutralizer from where it is taken out into soap pan. Neutralized oil is drawn into the second vessel called bleacher where colour of oil is removed by bleaching process with aid of chemicals such as carbon black and bleaching earth. Oil is generally heated upto 110°C by thermic fluid coils. Stirring is also continued. Bleaching process is done under vacuum. Bleached oil then goes to the filter press where bleaching earth and chemicals are separated and clean bleached oil is then drawn to deodourizer where oil is heated above 110°C through thermic fluid coils and then live steam is given to the oil from the bottom steam nozzles and temperature of oil is raised upto 200 to 220°C through thermic fluid coils.
How do you make oil out of shale?
You don't make oil from shale, you extract oil from shale. The shale acts like a sponge, sometimes the shale is so porous that the oil can be squeezed or sucked out, otherwise it can be extracted by crushing and heating the shale.
When was the green bridge of Wales formed?
it was formed millions of years ago
Where is oil formed?
Oil is commonly formed in rock or in sealed pockets under the seabed and it is from the Latin for 'rock oil' that the word 'Petroleum' is derived
Were is oil formed?
in the ground
What is a oil cake?
Oil cakes are formed from remains of oil seeds after the extraction of oil by oil mills.
How is crude oil formed and extracted from the ground?
Crude oil is made from prehistoric decomposed plants formed millions of years ago, it is extracted using an oil rig. :)
What is the fossil fuel formed from the remains of marine plants and animals?
oil
Can oil be formed again in your lifetime?
Some yes
What group formed to regulate oil prices?
OPEC
What group was formed to regulate oil prices?
OPEC
Why is crude oil a fossil fuel?
Crude oil, coal and are fossil fuels. They were formed over millions of years. Crude oil and gas were formed from dead marine organisms
Does anyone really believe oil is from dead dinosaurs Or that coal is from plants?
Scientists don't just believe, they know coal is formed from ancient plants compressed in anaerobic environments. However, nobody with a knowledge of geology or paleontology believes oil is formed from dinosaurs. Oil is primarily formed from plankton and algae.
How are oil sands formed?
Oil sands are formed from a mixture of sand, water, clay, and bitumen - a heavy oil. Over millions of years, organic material decays and the bitumen collects in sand and silt deposits, creating oil sands. Heat and pressure further transform the bitumen into crude oil.
Does iron or oil form faster?
Oil, a complex mixture of hydrocarbons, takes millions of years to form naturally. Iron is a naturally occurring element, formed by fusion in the core of a star. As far as humans need be concerned, iron is always present and oil is formed. If you must have one faster than the other, iron is formed faster than oil.
