answersLogoWhite

0

If it is AC then you don't need a formula, you just need a transformer.

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Engineering

What is the amperage for a 20000 volt-amp heating unit on a 240 volt single phase circuit?

Volt amps is the same way of saying watts. This is seen in the formula Watts = Volts x Amps. Using the formula I = W/E we transpose I = 20000/240 = 83.33 amps.


7200 volt 25kw transformer how many amps at 240 single phase?

The formula you are looking for is I = W/E. Amps = Watts/Volts.


If a single phase 240 Volt ac is applied to a full wave bridge rectifier. what will be the resultant dc voltage?

A: the rms value will be169 volts add a capacitor and no load 240 volts and the average will be 153 volts


What is a 208 circuit?

The 208 volt configuration is one phase of a three phase source at 240 volts, where the 208 volt circuit is connected between the center tap of one 240 volt phase (usually a grounded neutral, in the style of a standard 120/240 split phase system) and the high delta connection on either of the other two phases. 208 circuit would consist of two phases of a 208 volt wye system or could be all three phases. The voltage between conductors would be 208 volts. The voltage to ground from any phase would be 120 volts. A 240 volt delta system would give you a high leg to ground, somewhere around 190 volts and the other two would be 120 volts to ground.


An electric clothes dryer has a resistance of 8 ohms It draws 30 A of current What is the voltage in volts of the wall outlet that it is plugged into?

Power (Watts) = Current (Amps) * VoltagePower = 22Amps * 240 VoltsPower = 5,280 Watts5280

Related Questions

How can I convert a 240 volt power source to a 120 volt power source using a 240 volt to 120 volt adapter?

To convert a 240 volt power source to a 120 volt power source using a 240 volt to 120 volt adapter, simply plug the adapter into the 240 volt outlet and then plug your 120 volt device into the adapter. The adapter will step down the voltage from 240 volts to 120 volts, allowing you to safely power your device. Make sure the adapter is rated for the appropriate wattage to avoid damaging your device.


How many ampere equal to 3000 watt in 240 volt?

To convert watts to amps, use the formula: Amps = Watts / Volts. In this case, 3000 watts divided by 240 volts equals 12.5 amps. Therefore, 3000 watts at 240 volts is equal to 12.5 amps.


How do you convert 240 volts to 1.5 volts?

There are several ways to convert a 240 volt input to a 1.5 volt output. If the 240 volt input is alternating current (AC), a simple transformer can reduce the 240 volts to 1.5 volts (AC). A properly configured resistor or impedance coil in series with the input and output would also do the job but a tansformer also serves to isolate the output from the input offering greater protection for the 1.5 volt device. You If 1.5 volts direct current (DC) is required, a rectifier circuit is needed after the 1.5 volt AC output. If the source is 240 volts (DC), A resistance circuit in series can reduce the output voltage. You can also use electronic circuitry to chop of the 1.5 volts.


How many volts can b drawn off a 240 volt breaker?

240 volts maximum.


Can you convert a 120 volt Yamaha clavinova to 240 volts?

No, it is not recommended to convert a Yamaha Clavinova from 120 volts to 240 volts. This could damage the instrument and void any warranty it may have. It is best to purchase a Yamaha Clavinova that is already rated for 240 volts if needed.


What is the amperage for a 20000 volt-amp heating unit on a 240 volt single phase circuit?

Volt amps is the same way of saying watts. This is seen in the formula Watts = Volts x Amps. Using the formula I = W/E we transpose I = 20000/240 = 83.33 amps.


Can you convert 110 volt to 240 volt?

Yes


What the difference between a 120 volt and a 240 volt waffle iron?

One has an element designed to work on 120 volts, the other has an element designed to work on 240 volts.


How do you modify 240 volt appliances to run directly on 12 volts?

Modifying a 240 volt appliance to run on 12 volts is not recommended due to significant differences in voltage requirements and power consumption. The appliance would likely require a complete overhaul of its internal components, which can be complex and potentially unsafe. It is safer and more efficient to use a power inverter to convert 12 volts to 240 volts for the appliance.


Can you use 240 volts with a 120 volt supply?

No, it is not possible to use 240 volts with a 120 volt supply directly. You would need a transformer to step up the voltage from 120 volts to 240 volts. Attempting to use 240 volts with a 120 volt supply without a transformer can damage equipment and pose a safety hazard.


5000 watts at 240 volt will draw how many amps?

To find amps if watts and volts are known, use the formula; watts / volts = amps or 5000 / 240 = 20.83 amps


How do you convert 230 volts to 12 volt system?

With a Step Down transformer. But you will probably have a hard time finding a 240 volt unit. 120 volts units are readily available. <<>> It depends on how big of a transformer that you are looking for. There are many control transformers in the 50 to 500 VA range that have dual primary and dual secondary. The primary side can be connected to 240 volt or 120 volt and the secondary can be connected for either 12 or 24 volts.