V X A = W .....from.. (P=IV)
W = power
V x A = apparent power
The same way, as you convert Appels to Carrots ........... There is a formula: KVAr = KVA / KW or cos=KW/KVA > Yes, we are treating KW, KVA, & KVAr as the 3 sides in a 90 deg TRIANGLE ! KW= vertical katede KVAr = horizontal katede KVA = hypotenuse
To convert kilowatts (kW) to kilovolt-amperes (kVA), you can use the formula kVA = kW / power factor. If we assume a typical power factor of 0.8, 360 kW would be approximately 450 kVA (360 kW / 0.8 = 450 kVA). If the power factor is different, you would need to adjust the calculation accordingly.
To convert kVA to horsepower (hp), you can use the formula: 1 kVA = 0.746 kW, and then 1 kW = approximately 1.341 hp. A 62.5 kVA generator can produce about 50 kW (62.5 kVA × 0.8 power factor). Therefore, the generator can provide roughly 67 hp (50 kW × 1.341 hp/kW).
the unit of generators power is KVA becoze the kva is the power that contain the active power (KW) and the reactive power mean that the name plate of any generator must contain the rated kva of it (like the transformer P (KW) = P (kva) * cos fi P (KW) = V I cos fi for single phase P (KVA) = V I when cos fi closed to 1 this will increase the useful power that exit from the generator or transformer with my pleasure
KVA is the unit for the apparent power i.e it's the vector sum of the true power in KW and the reactive power in reactive volt-amperage. So, to get the value of the KVA for the 30KW,just divide the active power(30kw) with the power factor of that load.
kva and kw are related as KVA = (KW/PF) pf:power factor
To convert AC tonnage to kVA and kW, use the following formulas: For kVA: kVA = (tonnage x 3.517) For kW: kW = (tonnage x 3.517 x power factor). Remember to consider the power factor of the system when converting from tonnage to kVA and kW.
The same way, as you convert Appels to Carrots ........... There is a formula: KVAr = KVA / KW or cos=KW/KVA > Yes, we are treating KW, KVA, & KVAr as the 3 sides in a 90 deg TRIANGLE ! KW= vertical katede KVAr = horizontal katede KVA = hypotenuse
To convert kilowatts (kW) to kilovolt-amperes (kVA), you can use the formula kVA = kW / power factor. If we assume a typical power factor of 0.8, 360 kW would be approximately 450 kVA (360 kW / 0.8 = 450 kVA). If the power factor is different, you would need to adjust the calculation accordingly.
To convert 2 kW to kVA in single phase, you need to know the power factor. If we assume a power factor of 0.8 (common for many single-phase loads), the conversion formula is kVA = kW / power factor. Therefore, for 2 kW at a power factor of 0.8, the result would be 2 kVA / 0.8 = 2.5 kVA.
kVA = kW divided by (power factor). The power factor is the cosine of the angle between voltage and current.
Multiply by Amps.
It depends on the power factor, which depends on the reactance of the load.For a typical power factor of 0.92, 150 KVAR translates to 383 KVA, which translates to 352 KW.Power factor is the cosine of the phase angle (theta) between voltage and current. KVA times cosine (theta) is KW, while KVA times sine (theta) is KVAR.
To determine the KVA needed to run a 55 kW motor, you can use the formula: KVA = KW / Power Factor. Assuming a typical power factor of 0.8 for motors, the calculation would be KVA = 55 kW / 0.8 = 68.75 KVA. Therefore, approximately 68.75 KVA is needed to run the 55 kW motor. Adjust the power factor accordingly if you have a specific value for your motor.
kva*cos(phase angle)
To convert kVA to horsepower (hp), you can use the formula: 1 kVA = 0.746 kW, and then 1 kW = approximately 1.341 hp. A 62.5 kVA generator can produce about 50 kW (62.5 kVA × 0.8 power factor). Therefore, the generator can provide roughly 67 hp (50 kW × 1.341 hp/kW).
There are 1,000 watts (W) in a kilowatt (kW) and 1,000 volt-amps (VA) in a kilovolt-ampere (kVA). Therefore, 1 kVA is equal to 1 kW.