0
Not real sure but usually there is a draincock (little thing with a hole in it and a little two sided handle on it at the bottom of the radiator on one side or the other that you turn counterclockwise to drain the water/coolant. Remove the radiator cap first,as this lets it drain faster and make sure the engine is cool!! Dont forget to to close the draincock before you fill with coolant/water.
What else can I help you with?
How do you change the antifreeze on a Peugeot 106?
Drain coolant. Refill with correct water anti freeze mix
Coolant in Peugeot 307?
The coolant is water mixed with antifreeze (35-50%).
What coolant goes in a 1999 peugeot 106 zest?
For a 1999 Peugeot 106 Zest, the recommended coolant is a mixture of antifreeze and water, typically a 50/50 blend. It is advisable to use a high-quality ethylene glycol-based coolant that meets the specifications set by Peugeot. Always check the owner's manual for specific recommendations and ensure the coolant is compatible with the vehicle's engine materials.
What type of coolant do you use in a peugeot 106?
water and any summer collent combined with anit-freeze
How to change coolant on Celica vvti?
50/50 water/coolant
What coolant fluid do you put in your peugeot 307?
For a Peugeot 307, it is recommended to use a coolant fluid that meets the specifications of the Peugeot-approved antifreeze, typically a mixture of ethylene glycol and water. Look for a coolant that is specifically labeled for use in Peugeot vehicles, often referred to as "Long Life" or "Organic Acid Technology" (OAT) coolant. It's essential to follow the manufacturer's guidelines regarding the correct mixture ratio and to avoid mixing different types of coolant to prevent potential damage. Always check the owner’s manual for specific recommendations.
How do you flush the radiator on a 1990 Volkswagen cabriolet?
open the petcock drain. remove the radiator cap and fill the radiator with water, the fresh water will push out the old coolant and flush the system. Catch the old coolant inn a container as it is poison to animals.
Where to put water and coolant in a Peugeot 106?
To add water and coolant in a Peugeot 106, locate the coolant reservoir, which is usually a translucent plastic tank near the radiator. Remove the cap and check the fluid level; if it's low, add a mixture of water and the appropriate coolant until it reaches the recommended level. Additionally, ensure the engine is cool before opening the radiator cap to avoid burns, and refill if necessary. Always follow the manufacturer's specifications for the coolant type and mixture ratio.
What kind of coolant does a 1993 VW Cabriolet use?
A 1993 VW Cabriolet typically uses a coolant mixture of ethylene glycol-based antifreeze and water, often in a 50/50 ratio. It's important to use a coolant that meets the specifications set by Volkswagen, such as G12 or G11, to ensure proper engine protection and performance. Always check the owner's manual for specific recommendations and maintenance guidelines.
Where is engine coolant in 206 Peugeot?
If you are looking at the car from the front... The coolant expansion tank (where you add coolant/water) is a large white header tank on the left at the rear of the engine bay. It is to the immediate right of the offside suspension strut.
How much does the labor cost to change the water pump on a 1991 VW Cabriolet?
FREE! Do it yourself. It's not that hard.
Where to put water in a Peugeot 207?
In a Peugeot 207, water should be added to the windshield washer reservoir, which is typically located at the front of the engine bay. Look for a plastic tank with a cap that often has a windshield icon on it. Make sure to use clean water or a suitable windshield washer fluid to ensure optimal performance. Avoid adding water to the coolant reservoir, which is intended for coolant only.
