0
To add water and coolant in a Peugeot 106, locate the coolant reservoir, which is usually a translucent plastic tank near the radiator. Remove the cap and check the fluid level; if it's low, add a mixture of water and the appropriate coolant until it reaches the recommended level. Additionally, ensure the engine is cool before opening the radiator cap to avoid burns, and refill if necessary. Always follow the manufacturer's specifications for the coolant type and mixture ratio.
What else can I help you with?
Where do you put the oil in a Peugeot 106?
On the peugeot 106 there is an oil cap on the top of the engine, note don't forget to check the level after you have put some in otherwise you could over fill it. HKP
What antifreeze should you put in your peugeot 106?
For a Peugeot 106, it's recommended to use an ethylene glycol-based antifreeze that complies with the PSA (Peugeot Citroën) specifications. Typically, a 50/50 mix of antifreeze and distilled water is ideal for optimal performance. Always check your owner’s manual for specific recommendations regarding the type and color of antifreeze suitable for your vehicle. Regularly inspect and replace the coolant as needed to ensure proper engine temperature regulation.
How much oil do you put in a gear box on a peugeot 106 diesel?
1.75l
What colour wheels do you put on your orange peugeot 106 indepence?
black with out a dout !
Can you put Peugeot xsi suspension onto a Peugeot 106 1.1?
yes if you shange all suspension parts including brakes
Why left side light is not working on my peugeot 106?
put a new bulb in it then lol
What coolant do you put into a PEUGEOT 307 sw?
Antifreeze G12+, G12 or G11
Why would a Peugeot 106 continue to overheat but faster after the radiator was drained flushed and refilled with coolant?
I hope you replaced the coolant with a 50/50 mix of coolant and water. Pure coolant will overheat and freeze quicker than a mix. You should have replaced the thermostat, and checked the water pump, and fans for proper operation. Also after draining and refill the cooling system, it must be bled properly, which I suspect is your problem. Trapped air in the system will cause the engine to overheat.Answeri had this problem you've got to wait for the water to circulate. just open the cap and pour more water in (i put 2L of water in)
What coolant fluid do you put in your peugeot 307?
For a Peugeot 307, it is recommended to use a coolant fluid that meets the specifications of the Peugeot-approved antifreeze, typically a mixture of ethylene glycol and water. Look for a coolant that is specifically labeled for use in Peugeot vehicles, often referred to as "Long Life" or "Organic Acid Technology" (OAT) coolant. It's essential to follow the manufacturer's guidelines regarding the correct mixture ratio and to avoid mixing different types of coolant to prevent potential damage. Always check the owner’s manual for specific recommendations.
Where to put water in a Peugeot 207?
In a Peugeot 207, water should be added to the windshield washer reservoir, which is typically located at the front of the engine bay. Look for a plastic tank with a cap that often has a windshield icon on it. Make sure to use clean water or a suitable windshield washer fluid to ensure optimal performance. Avoid adding water to the coolant reservoir, which is intended for coolant only.
Where do you put water to cool your radiator in your Peugeot 205 junior?
you replace lost coolant through the expansion tank located at the back of the engine bay but only when cold
Can you put water in your coolant tank if you are out of coolant?
Yes
