answersLogoWhite

0

To disconnect the wires from the alternator on a 1999 Volvo V70XC, first ensure the ignition is off and disconnect the negative battery terminal to prevent any electrical shorts. Then, locate the alternator and remove the plastic cover if present. Carefully detach the wiring harness connector by pressing the release tab and pulling it off. Finally, use a wrench to remove the large nut securing the main battery cable to the alternator, allowing you to fully disconnect the wires.

User Avatar

AnswerBot

6d ago

What else can I help you with?

Related Questions

Remove and replace alternator on Chrysler cirrus?

disconnect the battery. Remove the alternator belt then disconnect the wires. Unbolt the alternator and remove. Bolt the new alternator in then connect the wires, belt, and battery.


How do you remove the alternator in a 300d?

Disconnect battery. Disconnect wires from alternator. Loosen bolts and remove belt. Remove bolts holing alternator in place.


How do you replace alternator on 97 cutlass 3.1?

Disconnect the battery negative. Loosen the belt and remove it from the alternator pulley. Disconnect all wires from the alternator. Unbolt the alternator from the bracket. Remove the alternator.


How do you remove the alternator in a Buick park avenue?

Disconnect the battery. Take the drive belt off of the alternator. Disconnect the wires from the alternators rear. Unbolt the alternator, remove, and install the new one. Reconnect the wires, belt, and battery to finish the installation.


How do you replace an alternator on a 2001 Montero sport?

Disconnect the battery. Loosen and remove the serpentine belt. Unscrew the bolts that hold the alternator in place and remove it. Disconnect the wires that still hold the alternator to the vehicle. Connect the new alternator to the wires and screw it back in place. Replace the serpentine belt.


How do you replace the alternator on a 1992 Nissan Pathfinder?

Disconnect the battery, loosen tensoiner, " the top middle wheel, under distributor cap" disconnect the wires on the alternator , unbolt and good to go


How do you replace the alternater?

In most vehicles you disconnect the negative battery cable, remove the belt that drives the alternator, disconnect the wires/plugs attached the alternator, remove mounting bolts and nuts then remove the alternator. Install in reverse order.


How do you replace alternator cummins?

Disconnect the battery, remove all wires from the alternator, slacken the belt tensioner, slip the belt off of the alternator pulley, unbolt the alternator, and remove the alternator. Installation is the opposite of removal.


How do you change alternator on 2000 Lincoln town car?

Disconnect the battery.Remove the serpentine belt.Take off the wires on the back of the alternator.Unbolt the alternator from the engine bracket.


How do you replace the alternator on a 1995 Toyota Corolla automatic?

disconnect neg.battery cable. disconnect wires from alternator. loosen pivot and lock bolts. detatch drive belt. remove pivot and lock bolts from the bracket. installation is reverse of these steps.


How do you replace an alternator on a 1991 buick regal?

Disconnect the 1991 Regal battery. Remove the alternator belt and wiring. Unbolt the alternator and install the new one. Reconnect the wires, install the belt, then reconnect the battery.


How do you change an alternator on a 97 Subaru?

Disconnect the battery, and wires from alt.Remove 2 bolts from front of alt. and 1 on back and lift out.