Check the owner's manual, or go to the dealer. These will be your only resources.
strangley enough after i did the power window reset my radio turned right on.
You probably need a code to enter into the radio presets as it is a security radio. Without the code it will not function.
you have to enter the 4 digit safe code found in your owners manual
you need to reprogram your radio when the battery has been disconnected - see owners manual
you must enter the 4 digit code found in the owner's manual
It is a complicated process to reset the radio in your Hyundai Sonata after changing the car battery. First you must have the access key. Enter the access key at the prompt and follow the instructions that will be shown on your radio screen.
you will have to pull your radio out of the dash to be able to look at the model number and/or serial number of your radio. Call a local Pontiac dealer and they can give you a code to enter when you turn your radio on after changing your battery.
you might need a new alternator. thas what happend to mine. Did any dash board lights come on and the radio start changing by itself?
Yes. If you disconnect the battery from the vehicle what happens is that the anti theft system on the radio thinks the the radio is being stolen because it loses power. What you have to do is enter a code that is provided to you by the dealership. If they don't have the code on record then the dealer has to remove the radio to find out the code.
It will delete the pre-programmed radio stations.
Insert the correct code in the radio by way of the preset buttons.
To enter the radio code for a 2003 VW Jetta, first turn on the ignition and then the radio. The display will show "SAFE" or "LOCK." Use the preset buttons (1-4) to input the code, pressing the corresponding button for each digit. After entering the full code, press the "MODE" or "OK" button to confirm and unlock the radio.
Radio presets.