To remove the key from the ignition of a 2003 Land Rover, ensure that the vehicle is in the "Park" position. Turn the ignition switch to the "Off" position, and gently pull the key out. If the key won't come out, check that the steering wheel isn't locked; sometimes, turning the wheel slightly can release the ignition lock. If issues persist, there may be an underlying problem with the ignition system that needs professional attention.
To shut of the SLS audio alarm on a Land Rover Discovery by inserting the key into the door. You can also turn the ignition on partially and leave it in that position for 10 minutes before starting the vehicle.
To start a 2003 Range Rover, make sure the vehicle is in park or neutral, then insert and turn the key in the ignition switch until the engine starts. Some models may also have a push-button start feature. Remember to keep your foot on the brake pedal while starting the engine.
To unlock the passenger doors on a 2003 Land Rover, you can use the key fob by pressing the unlock button. If the fob is unavailable, insert the key into the passenger door lock and turn it to unlock. Additionally, you can also unlock the doors from the inside using the central locking switch located on the driver's door panel.
Yes.
yes
You will need to remove the retaining ring at the top of your 2003 Kia ignition cylinder. The ignition cylinder will slide out. Remove the wiring harness from the back of the ignition cylinder.
Usually its in the handbook which comes with the car. Its entered using the ignition key in the drivers door, numbers are entered buy turning it in a direction a given number of times.
You must push key and turn.
Turn completely counter-clockwise.......and pull out.
It depends on if all keys are lost or not. I have programmed several land rover keys successfully with my tool which i purchased from http://www.ecutool.com/productshow.asp?id=11272&cso=Autoshop If all keys are lost, you need to delete all keys first; and then add new key. If you have working key, so you just need to add new key directly. Most of Land Rover key programmer tools need the PIN code, but my SKP-100 does not need. Also it could program used keys.
If the ignition is left in the on position, yes.
disconnect the battery for 10 mins or turn the ignition switch back and fourth with the key in it