To remove the passenger seat in a Saturn SL2 2002 you need an E10 inverted torque socket. Saturn mechanic tells me this is a standard tool, but is not widely available because they have not been used for very long. I found a set of inverted torque sockets, which included the E10, at a tool crib store in North Hollywood, JM Tools on Sherman Way at 818 764-8973, for under $20.00 The socket works fine, the seat lifts right out after you unbolt the four bolts holding the seat in place. Now, if I can just figure out how to detach the mounting brackets from the seat adjusting rails, I can install my aftermarket racing seats. Darn things are riveted on, and I'm really not happy drilling them off. Oh well. OR you can remove the covers located at the four base feet and use a good old metric socket done it many times don't need any tools other than the ones you have.
passenger side back seat, behind the panel by the door. may have to remove floor panel and/or seat.
The seat rails are bolted to the floor of the passenger compartment. Remove the bolts and any connected wiring and the seat should be easily removed.
remove passenger seat in 2003 cadillac cts
You have to remove the Allen bolt on the rear of the passenger seat, then remove the two Allen bolts exposed when you removed the passenger seat. The driver seat should slide back and off now.
Remove front passenger seat on Lexus es300?
how to remove front passenger seat of 1996 Honda Civic EX 2 door coupe
You have to remove the 28 mm bolts at the rear of the passenger seat on either side of the tail light. Now slide the passenger seat back to release a clip holding the front edge of the passenger seat. Then remove the 12 mm bolts holding the seat to the frame.
4 airbags in 2004 Saturn L-300; front driver and front passenger; roof mount side impact driver and directly behind back seat passenger and roof mount side impact passenger and directly behind back seat passenger
A front passenger seat on a 2005 Honda Civic is held on by four bolts. Pull the seat back to loosen the front two. Pull the seat forward to reach the two rear bolts. Remove the seat.
the folding tray OS bolted to the passenger seat. the passenger seat must be removed in order to unbolt the tray from the seat.Do not remove the passenger seat. remove the cover that attached to metal bracket of p. seat. it's mounted with two plastic screws. use flat screw driver to remove. then you will see 3 bolts on the bracket attached to p. seat. remove bolts and pull away.
remove the passenger pad first, when removed it uncovers screws on the rear of the drivers seat. Remove these and it comes off.
Should be a bolt in each corner of the seat