To remove the instrument panel on a Peugeot 106, start by disconnecting the car battery to prevent any electrical issues. Next, carefully pry off the trim surrounding the instrument panel using a flat tool, and remove any screws securing the panel in place. Once the screws are out, gently pull the instrument panel forward, disconnecting any electrical connectors attached to it. Be cautious not to force it, as this could damage the panel or connectors.
The fuse for the petro gauge can be found in the fuse box. The fuse will be labeled as the instrument panel fuse.
You can remove the door panel without breaking it by removing the two screws from the door handle and also the four screws from the speakers. Once done, gently pull the panel away from the door.
Yes
with a bar of soap
All the fuses are located to the side of the steering wheel. Remove flip down panel and search for the fuse using the fuse diagram located on the back of the flip down panel.
To change the rear window heater switch on a Peugeot 106, first disconnect the car battery to ensure safety. Remove the trim panel around the switch by gently prying it off, then unscrew the switch from its mounting. Disconnect the wiring harness from the back of the switch and replace it with the new switch. Reassemble the trim panel and reconnect the battery.
To change the boot lock on a Peugeot 106, first, remove the interior panel of the boot to access the lock mechanism. Disconnect the wiring harness and unscrew the old lock from its housing. Install the new lock by reversing the process: secure it in place, reconnect the wiring, and reattach the interior panel. Ensure everything is functioning properly before closing the boot.
on my r reg 106 i drilled out the 2 rivits
To remove the cigarette lighter from a Peugeot 106, first, ensure the vehicle is off and disconnect the battery for safety. Use a flathead screwdriver to gently pry off the lighter's surrounding trim or panel. Once exposed, carefully pull out the lighter assembly from the socket, disconnecting any wiring if necessary. Reverse the process to install a new lighter if needed.
What's the question? Yes, a peugeot 106 has dashboard lights.
To remove the dashboard on a Peugeot 106, start by disconnecting the car battery for safety. Next, remove any screws and clips securing the dashboard, which are typically located around the instrument cluster, air vents, and at the base of the dashboard. Carefully detach the dashboard from the mounting points, taking care to disconnect any electrical connectors or wires attached to it. Finally, lift the dashboard away from the vehicle, ensuring that all clips and fasteners are released.
you haft to remove the bumper first to get to the bolts holding in the lights