how to remove trans shifter cable ball socket from shifter ball
you will have to take the console out or at least the top piece of the console and then you will see the shifter is bolted to the floor.
Remove your center console. and then you will be able to see the whole module
there is a clip on the front of the shifter. pull this out and the outer part of the shifter will come off. next remove the center console. then you can get to the 4 bolts that hold the shifter in place.
remove the console, you should see some screws on the bottom of the boot, remove, replace boot, replace console
To perform a gear shifter replacement on your vehicle, you will need to first disconnect the battery to ensure safety. Then, remove the center console and access the gear shifter assembly. Unbolt and remove the old gear shifter, and install the new one in its place. Reassemble the center console and reconnect the battery. Test the new gear shifter to ensure it is working properly.
The 2002 Jaguar center console is held in place with six retaining bolts. Remove the retaining bolts and the shifter knob. The center console will lift upward.
carefully pry up on the boot around the shifter disconnect the wires then take the box out of the console and there under the box should be the bolts to remove the complete console
The 1995 Pontiac Grand Am center console is held in place with for retaining bolts. Remove the shifter knob. Remove the center console retaining bolts. The center console will come off.
To remove the shifter console on a 1998 Volvo S70, start by carefully prying off the trim surrounding the shifter using a flat tool to avoid damaging it. Once the trim is removed, locate and unscrew any bolts securing the console to the center console. You may also need to disconnect any electrical connectors for the shift indicator or other features. Gently lift the console upwards to detach it from the vehicle.
To replace the console light for the shifter on a 2006 Endeavor, first, disconnect the vehicle's battery to ensure safety. Next, remove the console cover by carefully prying it up with a trim removal tool, taking care not to damage any clips. Locate the bulb holder for the shifter light, remove the old bulb, and replace it with a new one. Finally, reassemble the console cover and reconnect the battery.
To replace the gear shifter on a 1998 Chevrolet Venture van, first, disconnect the battery to ensure safety. Remove the center console by taking out screws and clips, then carefully lift it to access the shifter assembly. Disconnect the wiring harness and any linkages attached to the shifter, then remove the old shifter. Install the new shifter by reversing the process, ensuring all connections are secure before reassembling the console and reconnecting the battery.