To replace the camshaft oil seals on a Fiat Punto, first, disconnect the battery and remove any components obstructing access to the camshaft, such as the timing belt or cover. Carefully remove the old seals using a seal puller or a similar tool, ensuring not to damage the housing. Clean the sealing surfaces, then lubricate the new seals with a bit of engine oil before pressing them into place. Reassemble all removed components and reconnect the battery.
how do get rear wiper arm off fiat punto grande
Buy a new punto! :)
replace the belt or adjust it
Fiat Punto was created in 1993.
The Fiat Punto is manufactured by the company Fiat. Fiat is an Italian manufacturing company. The manufacturing of the Fiat Punto started in 1993 and is still currently being produced.
The Fiat Uno 1.1 Fire (Fully Intergrated Robotic Engineering) motor is the same in the Fiat Punto 1.1. The torque settings as per Autodata is Camshaft carrier cap - M8 x 1.25 20Nm or M8 10Nm Camshaft gear - 70Nm Anything else, just ask
No its different
Engine code 176A7.000 camshaft carrier/cap torques M8x1.25 = 20Nm M8 = 10Nm
Fiat Punto 1.9l ltd service manual?
1. what is the problem of fiat punto front suspension 2. what is the mantinance of fiat punto front saspension
Fiat Punto car parts can be purchased at various retailers dealing with car parts. One can find Fiat Punto parts on the eBay and Breakeryard websites.
Fiat punto power steering reservoir on a y reg were can i find it