To replace the temperature sensor on a Porsche 944, first, ensure the engine is cool and disconnect the negative battery terminal. Locate the temperature sensor, which is typically found near the thermostat housing or on the cylinder head. Remove the electrical connector and unscrew the old sensor using a suitable socket or wrench. Install the new sensor, reconnect the electrical connector, and reconnect the battery terminal before starting the engine to check for proper operation.
its on the radiator looks like a big bolt with wires on it.
The sensor reads from the flywheel so look to the back of the engine or the front of the transmission bellhousing to find it.
BG
check to see if your tack is not jumping it could be a bad ref sensor
My 1983 Porsche 944 is 3,000 pounds
944 boxer? What is that?
Which temperature switch, there are 2. One is the DME temp switch and that one is close to the water inlet at the top of the motor and usually has a blue connector. The dash sensor is located in the middle of the block under the intake manifold and is a single wire sensor.
The Porsche 944 was manufactured from 1982 to 1991. The Porsche sports car was designed to last into the 1990s but the plans were changed and the 944 S3 became the 968 instead.
No
30,850 for the 944 s and slightly less for a stock 944
Although the Porsche 944 started selling in 1982, the Porsche 944 Turbo did not make it's international debut until March, 1985. Prior to it's international debut, a 944 turbo pre-production car competed in and won a 1984 24-Hour endurance race.
this isn't a question.