answersLogoWhite

0

What else can I help you with?

Related Questions

How do you reset the low brake fluid warning light in a Chevrolet Impala?

Add brake fluid


How do you reset the air bag message light on a 2004 Volvo S60?

Dealer or certified Volvo shop only.


How do you reset the brake lamp failure message?

replace the burnt out bulb


How do you reset a service message on a 2004 Volvo s60?

To reset the service message on a 2004 Volvo S60, turn the ignition key to the "II" position without starting the engine. Press and hold the trip odometer reset button on the dashboard. While holding it, turn the ignition off and then back to the "II" position again until the message disappears. Release the button, and the service light should be reset.


How do you reset message bulb failure position light Volvo V70 XC 2002?

To reset the message bulb failure position light on a 2002 Volvo V70 XC, first ensure that all bulbs are functioning correctly, including the brake lights, turn signals, and position lights. After confirming that there are no faulty bulbs, turn the ignition to the "ON" position without starting the engine. Then, press and hold the trip odometer reset button until the message disappears from the display. If the light persists, it may indicate a deeper electrical issue that requires further inspection.


How do you reset dashboard brake light on 1996 Volvo 960?

It will automatically go off when all the brake lights are in working order. Don't overlook the center brake light. :)


How do you reset check parking brake message on Renault scenic?

To reset the "Check Parking Brake" message on a Renault Scenic, first ensure that the parking brake is fully engaged and then disengaged. Next, turn the ignition on without starting the engine and press the brake pedal. Finally, navigate to the vehicle settings on the dashboard display and select the option to reset warnings or service messages. If the message persists, it may indicate a more serious issue that requires professional inspection.


How do you reset brake wear message on ml 350?

To reset the brake wear message on a Mercedes-Benz ML 350, turn the ignition to the "On" position without starting the engine. Use the buttons on the steering wheel to navigate to the "Service" menu on the dashboard display. Select "Assist Plus" or "Service A/B" and follow the prompts to reset the brake wear indicator. Confirm the reset when prompted, then turn off the ignition.


How do you reset the maintenance message on 2006 Volvo V70?

To reset the maintenance message on a 2006 Volvo V70, turn the ignition key to the "II" position (just before starting the engine). Press and hold the trip odometer reset button on the dashboard, then turn the ignition off. While keeping the button pressed, turn the ignition back to the "II" position again until the maintenance message disappears, then release the button. The maintenance light should now be reset.


How do you reset the message center computer on a Volvo s60 turbo?

To reset the message center computer on a Volvo S60 Turbo, turn the ignition to the "On" position without starting the engine. Press and hold the "Trip" button on the instrument cluster until the display changes or resets, usually taking about 10 seconds. Release the button, and the message center should be reset. If issues persist, consult the owner's manual or a dealership for further assistance.


How do you reset the brake light on a 1990 Chevrolet pickup?

If you are talking about the red light on the dash then you don't "Reset" it you need to have the brake's serviced or fill-up the fluid in the reservoir. I light is designed to come on if the fluid is low.I also advise you get it serviced if the fluid has not been changed in the last 24 months.Hope This Helps


How do you reset the brake warning light on Porsche 928?

To reset the brake warning light on a Porsche 928, first check and ensure that the brake fluid level is adequate and that the brake system is functioning properly. If the fluid level is correct and there are no issues, turn the ignition to the "on" position without starting the engine. Then, press the brake pedal several times; this should reset the warning light. If the light remains on, it may indicate a deeper issue that requires professional diagnosis.