* Hold down the odometer reset button with the ignition off * Wait for the trip indicator to show 0's. Then turn the ignition on, but don't start the car * Let go of the reset button, and press the Min. button.
To reset the maintenance light on a 2006 CLK 350, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn the ignition off and back on, and the maintenance light should be reset. If it doesn’t turn off, repeat the steps.
To reset the maintenance light on a 2006 Mercedes SLK, first turn the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within 10 seconds. After that, turn the ignition off and then back on to verify that the maintenance light has been reset. If the light remains on, repeat the steps.
To reset the maintenance light on a 2006 Toyota Prius, first, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. When you turn the ignition back on, the maintenance light should be reset. If it remains on, repeat the steps to ensure the process was completed correctly.
How do you reset maintenance service indicator on a 2006 Mercedes E350
see you tube...theres a fix on there
I made a video on how to change the head lights in my jetta This is for a 2006 jetta tdi, but other years apply http://www.truezombielife.com/2006-jetta-head-light-replacement/
To reset the maintenance required message in a 2006 Acura TSX, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Turn the ignition off, then start the engine, and the maintenance light should be reset. If the light remains, repeat the process.
Check the Evap sinser
You do not reset it, it is a fault code. It is not a routine maintenance indicator. Fix the problem and the light will go out.
You have to push the reset button where your mph gauge is.
How do you turn off the check engine light off and the tire pressure light off the air bag light off
Press the "step" button until "0 miles to service" is displayed. Hold "reset" until it resets.