0
I just did this on my 1993 Volvo 240 wagon. The belt runs from the AC compressor to the Power Steering pump and there is a mounting bracket on the left side with a bolt that can slide up and down to get the correct tension.
Now, in my case, even if I had the bolt all the way at the top of the bracket, the belt was still not tight enough. For a more macro adjustment, the bracket can be moved between two bushing holes. I moved my bracket from the bottom hole to the top hole (bushing came out easily with some wiggling) and that gave me plenty of room to adjust the bolt in the bracket to the right tension.
What else can I help you with?
How do you tighten the power steering belt on your Mitsubishi diamante 2002?
Tighten power steering belt 2002diamonte
How do you tighten the power steering pump belt on a 94 Acura Vigor?
The power steering belt has an adjustment pulley. To tighten the belt on a 1994 Acura Vigor loosen the adjustment pulley and pull it up higher than tighten it.
How do you tighten the power steering pump on a 1981 C10 Chevrolet?
Do you need to tighten the entire pump assembly (brackets and belt) or just tighten the steering box?
How do you tighten the power steering belt on your 1998 mercury villager?
The belt is tightened with an adjusting screw.
What do you do when the power steering belt slips off?
Put it back on and tighten the bracket.
How do you Tighten power steering belt 1996 dodge?
look in the instruction booklet
What causes your steering wheel to tighten up?
Assuming you have power steering, you may have a loose belt or the power steering system has a leak and the power steering fluid reservoir is low or empty.
How do you tighten a power steering belt on a 2002 Kia Optima?
To tighten the power steering belt on a 2002 Kia Optima, first, locate the power steering pump and the tensioner pulley. Loosen the adjustment bolt on the power steering pump, then adjust the tension by sliding the pump until the belt is tight but not overly strained. Tighten the adjustment bolt securely, and check the belt tension again to ensure it is within the proper range. Finally, make sure the belt is properly aligned on all pulleys before closing everything up.
How do I change the power steering belt in a 1994 roadmaster?
Begin by loosening the tensioner pulley. Slide the tensioner pulley to the right. The power steering belt will become loose and can be removed. Put the new power steering belt on and tighten it by sliding the tensioner pulley to the left.
Where is the AC and power steering belt tensioner located on a Dodge Neon?
The alternator will move in and out to tighten the belt and the PS pump will do the same
What does it mean if the steering wheel on your car squeals when you turn it?
tighten the belt or replace it Maybe a loose power steering box or a worpted pully.
How do you tighten 1989 ford ranger belt?
at the power steering pump theres a long bolt on the one side when tighted it tightens the belt.
