To remove the ball joint in a Volvo 740 GL, first, lift the vehicle and secure it on jack stands. Then, remove the wheel and brake components to access the suspension. Use a ball joint separator tool to disconnect the ball joint from the control arm, and then unbolt it from the steering knuckle. Finally, replace the ball joint with a new one, ensuring it's securely fastened before reassembling the suspension components.
Remove the ashtray and you will find them there.
how to install volvo 740 turn signal lens
Probably - remove distributor cap and look
Take it to the junk yard starter is almost impossible to remove . Good Luck
Remove the ashtray. Then lift up and out on the tab labeled "Fuse Box"
#1346030
Yes. The 740 and 940 are very similar and share many common parts.
Under the radio. Behind the ash tray. Remove the ash tray, remove a plastic enclosure, and you will see the fuses
Yes, either remove the drive shaft or tow it rear wheels off the ground
under an behind ash tray remove ash tray an all will be answered
To remove the driver door hinges from a 1990 Volvo 740 Turbo, first ensure the door is supported to prevent it from falling. Remove the door panel and disconnect any wiring or mechanical linkages. Then, use a socket wrench to remove the hinge bolts from the body of the car and the door. Once the bolts are removed, carefully lift the door off the hinges.
behind the glove In the relay/fuse panel behind the ashtray. After you remove the ashtray and holder you will need to remove the box above it to access the relay