For a Fiat Punto brake caliper, you typically need a 7mm Allen key (also known as a hex key) to remove the caliper bolts. However, it's always a good idea to double-check your specific model year, as some variations may exist. Always ensure that you have the correct tools before starting any brake maintenance.
12mm Hex
Fiat Punto was created in 1993.
The Fiat Punto is manufactured by the company Fiat. Fiat is an Italian manufacturing company. The manufacturing of the Fiat Punto started in 1993 and is still currently being produced.
Use hammer.
To change the back brakes on a 1994 Fiat Punto, first, lift the rear of the car using a jack and secure it with jack stands. Remove the wheel, then take off the brake caliper by unbolting it and slide it off the rotor. Replace the brake pads by removing the old ones and inserting new ones, making sure to compress the caliper piston if necessary. Reassemble by putting the caliper back in place, reinstalling the wheel, and lowering the car.
No its different
Fiat Punto 1.9l ltd service manual?
if its on a punto gt is a lot of work.have to remove inlet manifold costs a lots for the job to be done in a garage.
open the door then drive into it with another car and it should remove it safely if not just use a hammer
There is no dipstick for the gearbox the punto has a filler/level plug on the front of the gearbox 12mm Allen key fitting hope this helps best wishes Mike 2
1. what is the problem of fiat punto front suspension 2. what is the mantinance of fiat punto front saspension