Nationally, an engineer cannot become licensed or offer his Professional Engineering services to the public until he has successfully passed the Professional Engineering (PE) Exam. Requirements for eligibility to take this exam vary from state to state.
Generally, it takes a Bachelor's Degree in Engineering from an accredited engineering institution and four years of work experience in the engineering field to sit for the PE Exam. Prior to taking the PE Exam the applicant must have passed the Fundamentals of Engineering (FE) Exam.
If a potential applicant for the PE Exam does not meet the four-year degree requirement, he can waive The Bachelor's Degree prerequisite if he is sponsored by a Professional Engineer and has the years of engineering work experience required by his state.
The PE Exam is divided into two parts. The first half consists of a test of breadth requirements for his particular discipline. Engineering disciplines can include chemical, computer, nuclear, petroleum, Naval architecture and marine engineering, mechanical, structural and more. The second half of the PE Exam is comprised of more specific testing on the potential PE's particular engineering specialty.
The National Council of Examiners for Engineering and Surveying (NCEES) is the agency responsible for administering the PE Exam. It is given two times a year -- in April and October. Normally it takes from eight to ten weeks to receive the results of the PE Exam. They are available online and can be received through the U.S. Mail.
It is highly advisable that anyone considering taking the PE Exam complete a PE Exam prep course prior to the test. These prep courses are available online and in-person through the NCEES.
The cost of the PE Exam changes at various times from area to area. Roughly, it is in the neighborhood of $350. Because of the cost of the exam, it is prudent for a potential PE Exam taker to undergo a PE Exam prep course prior to taking the actual PE Exam. The goal is to pass the PE Exam the first time it is taken.
The PE Exam is broken into two four-hour sessions. The first and morning session is a test of the breadth knowledge of the engineering discipline being tested for. Then there is a break for lunch and the afternoon test session consisting of the more intricate aspects of the particular PE specialty.
The PE engineering exam is the last step in what is typically a four-step process that all engineers must complete to secure a license in their state. Although the process does vary from state to state, all engineers must complete what is known the Professional Engineer PE examination to secure a license. There is a PE engineering exam for each area of specialty.Applicants Must First Pass The FE Exam Before Taking the PE Engineering ExamPrior to taking and passing the PE Engineering exam, applicants must also take the FE exam, which is also known as the Fundamentals of Engineering exam. After passing that examination, applicants normally go on to work in the field for four years. After working in the field, engineers will then need to pass the PE examination to secure a Professional Engineering license.Applicants Can Take The PE Examination Twice a YearEach year the PE engineering exam is administered twice a year. The exam is normally administered in April and then again in October. The PE examination is an eight hour long exam that is split into a morning and afternoon section. Depending on an applicants' specialization, test takers will either take an electrical, civil, mechanical or industrial PE examination. The test also includes a component of engineering ethics as well.Deadline to Apply for the PE ExaminationApplicants who intend to take the PE examination in any given year must make certain they submit their application by the application deadline date. Deadlines for first-time applicants are different than the deadlines for re-applicants. Applicants should verify what the deadline for submitting the PE engineering exam application is in their state. The application to sit for the exam must include the set fee to sit for the exam.Passing The PE Engineering ExamThe PE Engineering Exam is a rigorous test. Prior to sitting for the test, applicants must study and prepare to take the exam. There are numerous PE prep courses and PE engineering exam guides and resources applicants can use to prepare for the test. Applicants should be prepared to pass the PE Engineer Exam the first time taking the exam.To get the best results on the test, engineers should also plan on purchasing one or more PE exam prep books and enroll in a PE prep course.
Engineers that have completed three out of four steps to becoming a licensed Professional Engineer can apply to sit for the engineer PE Exam. The engineering PE Exam is designed to test applicants' knowledge and skills in either industrial, mechanical, electrical or civil engineering. In addition to these specializations, applicants will also need to know engineering ethics.The Four Step Process to Becoming a Licensed Professional EngineerEngineers who sit for the engineering PE Exam must also pass the FE exam. Once an engineer passes the FE exam, he or she will then have to work as an engineer for four years in the field. After working in the field, applicants can then apply to take the engineer PE Exam in their state.The Engineering PE Exam is Administered Two Times Per YearIn the United States, engineers can sit for the engineering PE exam two times per year. The exam is offered in April and October each year. Applicants who plan on taking the exam should plan on spending a full eight hour day taking the examination. There are several different types of PE examinations, so applicants will need to specify whether they are interested in taking the civil, mechanical, electrical or industrial engineering PE exam.Applicants Should Pay Close Attention to DeadlinesEngineers who plan on sitting for the engineering PE Exam must plan on submitting their application by the deadline date. Deadline dates do vary, so applicants should take the time to find out when the deadline date is for their state. In addition, the deadline dates are different for re-takers and first time takers. There is a fee to sit for the examination, so it is important that engineers submit their application along with the current fee as well.Prepare to Pass The Engineering PE ExamEngineers who take the time to prepare for the engineering PE exam do much better on the exam. There are numerous engineering PE exam resources that engineers can use, including but not limited to an engineering PE exam prep course, study guides and manuals as well. Engineers should plan on passing the test on the first try because success rates for re-takers are much lower.Engineers who want to score as high as they can on the engineering PE exam, should start studying early and take an engineering PE exam and purchase PE exam prepare books.
The general requirements for a person interested in taking the PE (or Professional Engineering) exam consist of a Bachelor's Degree from an accredited engineering four-year institution, the completion of the FE (or Fundamentals of Engineering) exam, and roughly four years of experience in the field of engineering. In certain states, a person can by-pass the degree requirement and take the PE exam, as long as he is sponsored by a Professional Engineer and has the necessary work experience prescribed by the state where he is taking the exam. Each state has its own specific requirements for an applicant to qualify to take the PE Exam. Each state also has its own passing score rank. There are volumes of materials and review courses available in book form, online, and in-person seminars. Some prepare the potential test taker in the breadth requirements for the first half of the eight-hour PE exam. There are books with practice problems, sample PE exams, civil PE review topics, and study materials in the various disciplines of the Professional Engineering profession. Professional Engineering disciplines include civil, transportation, mechanical, electrical, agricultural, control systems, petroleum, structural, industrial engineering and more. The PE test is eight hours long and is divided in two four-hour segments. In some of the engineering disciplines, the first segment is a broad spectrum test of a particular engineering discipline. The afternoon session in this instance would be on more specific aspects of that discipline. There is a break for lunch between the two test-taking segments. The PE exam is an open-book exam. People taking the PE exam can bring in reference materials from the outside, as long as they are bound together in book or notebook form. Pass rates vary widely from state to state, but, overall, average between 50 to 80 percent for first-time PE exam takers. Pass rates for people repeating the PE exam are lower. Results are released eight to ten weeks after the test is administered. A test taker can be notified online or by U.S. mail. Anyone intending to take the PE exam should be adequately prepared for this test. With all of the test preparation available online and in book form, there should be no problem finding the necessary study aids. A PE preparation seminar is also recommended for potential test takers. There, instruction and sample tests will be given weekly to help the student prepare in all areas.
PE 2 exams extended to May 2010
In general, jobs are not required to be an engineer, but a four-year college degree from an accredited university is. To be a professional engineer (PE) requires passing the FE (Fundamental of Engineering) exam, working under supervision of a PE for a specified time period, and passing the PE exam.
1 %
The exam is nondisclosed. Individuals taking the exam sign a statement indicating that they will not disclose questions and answers subsequent to taking the exam.
BF =( Tdb,out - Tcoil )/(Tdb,in - Tcoil) Source: MERM for the PE Exam - Michael Lindeburg, PE
Engineers in a particular discipline are required to take the PE or Professional Engineering Exam before they can practice in the United States. In order to qualify to take the PE exam, an applicant should have a four-year engineering degree from an accredited university engineering curriculum, pass a pre-requisite exam in the fundamentals of engineering (FE) and possess the required engineering experience for his state. Exact requirements for taking the PE exam will vary from state to state. An alternative way for an applicant to qualify to take the PE exam is to be sponsored by another Professional Engineer in his discipline and have the requisite amount of work experience determined by the state that he is planning to practice in. Each state has different work experience requirements. Any potential applicant for the PE exam should check his state's specific requirements prior to applying to take the exam. The National Council of Examiners for Engineering and Surveying (NCEES) is the testing agency for the PE exam. The NCEES offers PE exams in all engineering disciplines, including, but not limited to chemical, electrical, computer, mechanical, structural, nuclear, petroleum, industrial, and Naval architecture and marine engineering. Each testing discipline within the PE exam lasts for eight hours and is divided into two four-hour sessions. Exams in both sessions are given in the same day and allow for a lunch break. Depending upon the particular discipline's exam, one testing session might involve an exam on the general principles of that particular discipline, and the following session would be a more detailed exam on the finer points of that particular discipline. Some of the disciplines are simply divided into two sessions, with no one session being more detailed than the other. The pass rate for test takers of the PE exam varies from year to year but is higher for first-time test takers than for potential engineers trying for a second time. The average pass rate ranges from 50 to 80 percent for first-time PE test takers. The PE exam is an open-book examination. A test-taker can bring his own reference materials to the exam, as long as they are bound in a three-ring binder or other similar binding style. It normally takes eight to ten weeks for the test results to be released. Online notification is offered, but notification through the U.S. mail is also permitted.
A master electrician cannot get a PE license without going through the process an Engineer has to go through to get a PE license.The typical process to become a PE is to have 4 year undergraduate engineering degree, then pass the Fundamentals of Engineering exam (F.E.) which is 8 hours. After 4 years of work experience (at least 2 of which must be design), the candidate can sit for the PE exam. Upon passing the exam, the candidate becomes a PE.There is the possibility of taking the PE exam without having an engineering degree (or even a college degree I think) but that will require 10 years of Engineering experience (and this varies from state to state). The reality is passing the FE exam without an engineering or science background is almost impossible, and to pass any of the PE exams without this background would be very difficult as well.Now, the flipside is true of a PE or Engineer who wishes to become a Master Electrician. Just like it is required to have design experience to be eligible to take the PE exam, it is required for one to work as an electrician for several years before being eligible to become a licensed electrician.Having an Engineering degree can waive a few years off the requirement, but the work still needs to be done.For the record there are people out there with both licenses, one of them being Joseph Sheehan who is one of the editors of the National Electric Code.
Humanities ~ 'A' in CWK, start with a 'C' in Exam. Technology ~ 'A' in CWK, start with a 'C' in Exam. History ~ 'A' in CWK, start with an 'E' in exam PE GCSE ~ 'A' in CWK, start with a 'F' in exam
no.