Mix the salt and powder together in water until the salt dissolves.
Pour the mixture through filter paper to separate the powder from the water.
Boil the water so it evaporates and leaves the salt behind.
If the powder is iron, you can use a magnet to separate them rather than mixing in water.
get a magnet that attracts iron
Hold a magnet over it and the iron will fly out of the salt and stick to it, and the salt will stay there.
Use a magnet to remove the iron, a filter or screen to remove the sand, and a still to remove the salt.
First remove iron filings with a magnet. That leaves sand, salt and chalk dust. Add water which dissolves the salt, and filter leaving the sand and chalk dust on the filter paper. Put that back in water and add acid to dissolve the chalk dust (CaCO3) leaving the sand as a solid. Filter to obtain the sand. The chalk dust will now be in the acid as CO2 and H2O and the Ca salt of the acid.
A strong magnet or electromagnet can be used to hold the iron oxide(rust) in place as the water is poured off. Care should be taken to bring all of the rust near the magnet in order to collect it all.
how do you separate aluminum powder and salt
One way to separate copper powder and salt is through a process called filtration. You can mix the salt and copper powder with water to dissolve the salt, leaving the copper powder behind. Then, you can use a filter to separate the solid copper powder from the liquid salt solution.
When iron powder and salt are added to water, the iron powder will react with the water to produce iron oxide (rust), hydrogen gas, and heat. The salt will dissolve in the water. This reaction is a chemical change, resulting in a mixture of iron oxide, hydrogen gas, salt solution, and any unreacted iron powder.
First add water to the mixture to dissolve the salt, then filter with filter paper to obtain the mixture of gold and iron. Proceed by using a strong enough magnet to extract the iron powder and you should be left with the Gold.....
One way to separate iron powder and sulfur powder is by using a magnet. Since iron is magnetic, you can attract and separate the iron powder from the sulfur powder. Another method is to use a technique called sublimation, where the sulfur powder is heated to convert it into a gas, leaving behind the iron powder.
A magnet will attract the iron leaving the coffee behind. It is also possible to separate them by flotation on water; add some detergent to the water to break the surface tension so the iron powder can sink while the coffee powder floats.
To separate table salt from talcum powder, you can use a method based on solubility. Dissolve the mixture in water; the salt will dissolve while the talcum powder will not. After stirring, filter the mixture to separate the undissolved talcum powder from the saltwater solution. Finally, evaporate the water from the salt solution to retrieve the salt.
a very simple and a common technique to separate them out is use a magnet. Since a magnet attracts iron , bring a strong magnet in front of the mixture and almost all of the iron powder gets separated
yes it is hard though
You can use a magnet to separate the iron fillings from the sulfur powder. The iron fillings will be attracted to the magnet, allowing you to easily separate them from the sulfur powder.
Use a magnet to remove the iron filings. Filter the remainder to separate the insoluble chalk powder from the water. Wash and dry the iron filings as they will be contaminated. Dry the chalk powder to remove traces of water.
a magnet would pull out the iron, and leave the salt.