Put the mixture in water. The sugar will dissolve, the glass will sink to the bottom. I would not advise drinking it after though. The glass can be removed by filtration; the sugar can be removed from solution by evaporation.
To separate a broken bottle from large sugar crystals, you can use a sieve or strainer to strain the mixture. The broken glass pieces will be caught in the sieve while the larger sugar crystals will pass through. Remember to handle the broken glass carefully to avoid injury.
You can use a process called evaporation to separate sugar from water. By heating the water, it will evaporate and leave the sugar behind. Once all the water has evaporated, you will be left with the sugar.
To separate this mixture, you could first use a magnet to separate the iron filings. Then, you could add water to dissolve the sugar, leaving the sand and sawdust behind. The sawdust can be separated from the sand by filtration.
to separate the mixture of sand and sugar:- first: you can mix water in it and after mixing you can separate the water and sand. and after that you boil the water until whole water is evaporated and you get sugar and sand separated. second: if difference b/w size of sugar and sand particle you can use met to separate them.
You could dissolve the bulk material in water, then pass the solution through a filter paper. This will stop all the sand. The residual solution should be evaporated under a reduced air pressure, so as to avoid overheating the sugar when it crystallizes out.
You have to pick them up
To separate a broken bottle from large sugar crystals, you can use a sieve or strainer to strain the mixture. The broken glass pieces will be caught in the sieve while the larger sugar crystals will pass through. Remember to handle the broken glass carefully to avoid injury.
To separate charcoal and sugar, one method could involve adding water to the mixture and stirring, which would dissolve the sugar but leave the charcoal behind. Next, the mixture could be filtered to separate the dissolved sugar solution from the charcoal residue. Finally, the water could be evaporated to retrieve the sugar.
To create a sugar rim on a cocktail glass, first dip the rim of the glass in a shallow dish of water or citrus juice. Then, dip the wet rim into a separate dish of sugar, rotating the glass to coat the rim evenly. Shake off any excess sugar and let it dry before pouring in the cocktail.
Dissolve the sugar in water and then evaporate the water
There are approximately 1.2 grams of sugar in a glass of wine. There could be slightly more or less depending in the type of wine. This amount is for a five ounce glass.
the crystals of sugar separate out..
Magnifying glass and tweezers is the only simple way I can think of. There might be some way of doing it by density or size. You could use an experiment.
you could but why would you when you could have something tasty...
This would be a mixture, because you could easily separate the water and sugar again by boiling the water.
Put them in water. Sugar dissolves, sand remains Filter the solution to separate sand and salt. Evaporate solution with dissolved salt to get salt back
You can use a process called evaporation to separate sugar from water. By heating the water, it will evaporate and leave the sugar behind. Once all the water has evaporated, you will be left with the sugar.