0
when starting from a wall you first need to make sure the wall is square to perfect. use the 3-4-5 method to find the perfect square-- this will tell you if the wall is perfectly squared or not.
In this case I will be starting with my right shoulder-- Stretch your tape measure and point the metal tip into the eight side corner of the room. now measure out to the left 3 feet and make a mark at the 3 ft. point with a magic marker or pencil.
now measure from the corner along the wall down to a 4 foot mark and mark a 4 ft. point
now measure diagonally from the 3 foot point to the 4 foot point and you should have a 5 feet reading-- if you have a 5 ft reading then you found the perfect square starting point and now cut a tile in a diagonal / half and set it in the corner of your calk line square. The rest is way too indepth so my advice is to "Google" How to lay ceramic tile to find your favorite how to video.
Good luck.
What else can I help you with?
What does 'if you can lay tiles' mean?
They are wondering if you know how to install tiles.
Does it take more tiles to lay the tiles diagonal versus horizontal?
Yes, when you lay it on a diagonal, there is more waste. Generally, with a straight lay, you need 6-10% waste. With diagonal, it's best to have at least 15% extra.
How hard is it to lay ceramic tiles?
It is not too difficult to lay tiling down yourself if you follow some simple steps before even attempting the task. You want to make sure that you lay the tiles down on and use sanded grout.
How many square feet are in a 12 x 16 room?
The short answer is 12 x 16 = 192 ft2 Think of it this way: if you have a stack of 1 ft x 1 ft tiles, you can lay a row of 12 along the short wall. Then you can keep laying rows until you have 16 along the long wall - 16 rows of 12 or 12 rows of 16 - count the tiles and you always get 192.
Can you lay ceramic tiles over vinel tiles?
It is possible but I would not reccomend it. If possible remove the old tile before laying the new tile. If you want to avoid removing the old tile you can lay a cement board over the old tile before installing the new tile.
How can I fix an uneven wall that is causing my tiles to not lay flat?
To fix an uneven wall causing tiles to not lay flat, you can use a leveling compound to smooth out the surface before installing the tiles. This will help create a flat and even surface for the tiles to adhere to properly.
Where might one purchase wall tiles for a bathroom?
One can find a wide variety of wall tiles to purchase at Home Depot and LOWES. One can also find great ideas and helpful hints on how to lay tiles from workers at these fine retail stores.
Can you put tile over tile on a shower wall?
no the tiles have too smooth of a finish and other tile will not stick to them need to remove old tiles and then lay new
Why is it necessary in building a pool to lay pool tiles?
To lay pool tiles, you will need mortar to affix the tiles to the cement pool, you will also need grout for between the tiles and a sponge to clean the tiles.
What does 'if you can lay tiles' mean?
They are wondering if you know how to install tiles.
Can you lay ceramic tiles over thermaplastic tiles?
nope
What is Best way to lay carpet tiles?
the best way to lay carpet tiles is to keep the edges tightly fit.
How might one apply ceramic wall tiles?
One might apply ceramic wall tiles by using either of 2 products: tile mastic or thinset mortar. The application process is the same for both products. One could use a V-notched trowel to spread some of the mortar onto the wall, covering an area just big enough to lay in about 8 tiles.
Is it possible to lay your own ceramic tiles at home?
It is possible to lay your own ceramic tiles at home but be cautious because it requires skill and a lot of practice to lay them correctly and make it look nice.
When you play Rummikub you lay down a tiles do you replace the tiles that has been played Keeping 14 tiles in your hand at all times?
no you are trying to get rid of all your tiles.
How can I create a herringbone pattern?
To create a herringbone pattern, start by laying the first row of tiles at a 45-degree angle to the wall. Then, lay the next row of tiles in the opposite direction, forming a V-shape. Continue alternating the direction of the tiles in each row until the desired herringbone pattern is achieved.
How is subway tile installed in a home?
You must make the measurements that you need to lay the tile, then lay out the tiles on the floor to help familiarize yourself with the pattern you are going to be working with. Lay your grouting adhesive and then finally the tiles.
