How should a narrow aisle lift stop when you release the dead mans pedal
🔄 Click to see definition
Definition1/19
Very quickly
🔄 Click to see term
Term1/19
In which order should pallets be staged for ease of loading when pulling a multi-stop load
🔄 Click to see definition
Definition1/19
the smaller pallets in first
🔄 Click to see term
Term1/19
When putting away or stocking recently dated freight what should be done with the older existing freight that is already there
🔄 Click to see definition
Definition1/19
When putting away or stocking recently dated freight, what
should be done with the older existing freight that is already
there
🔄 Click to see term
Term1/19
What is difference between floating load and ground load
🔄 Click to see definition
Definition1/19
In case of grounded load load is grounded and voltage is
measured across it.
while in case of floating load load is not grounded instead it
is connected in feedback circuit.
🔄 Click to see term
Term1/19
When building a pallet to be shipped over the road how should the cases be placed on the pallet
🔄 Click to see definition
Definition1/19
they should be placed with the small cases on the bottom and the
larger ones on top.
🔄 Click to see term
Term1/19
When putting away pallets of freight into multiple dept drive in bays what level of racking should be stocked first
🔄 Click to see definition
Definition1/19
top to bottom
🔄 Click to see term
Term1/19
What should be done to differentiate one inbound load from the another
🔄 Click to see definition
Definition1/19
Assign a different number to each... no?
🔄 Click to see term
Term1/19
What has to be verified as intact before the doors of an inbound trailer are opened
🔄 Click to see definition
Definition1/19
The break lights.
🔄 Click to see term
Term1/19
How should the work-to-complete outbound deliveries be prioritized
🔄 Click to see definition
Definition1/19
By the product
🔄 Click to see term
Term1/19
What should you always check before entering a trailer docked
🔄 Click to see definition
Definition1/19
Before entering a trailer dock, you should verify that your
light wheels are docked.
🔄 Click to see term
Term1/19
What can be done if a trailer is overweight in the tail
🔄 Click to see definition
Definition1/19
If a trailer is overweight in the tail, one way of solving the
problem is to reload the trailer so that the weight is commonly
distributed. If this is not an option, finding a more suitable
vehicle to pull the load is an alternative solution.
🔄 Click to see term
Term1/19
After Recording The Damage Encountered In A Load What Should Be Done With The Damaged Cases
🔄 Click to see definition
Definition1/19
mark them as damaged report it to a supervisor
🔄 Click to see term
Term1/19
When unloading a trailer and damage is discovered what should be done
🔄 Click to see definition
Definition1/19
Write it down!
🔄 Click to see term
Term1/19
How many standard pallet spots can be loaded into a 48 foot trailer
🔄 Click to see definition
Definition1/19
24
🔄 Click to see term
Term1/19
What are the four major load control fonction found on a load lift
🔄 Click to see definition
Definition1/19
Inspirations
🔄 Click to see term
Term1/19
Assemble bills with date sensitive product how should you go about getting the correct cases
🔄 Click to see definition
Definition1/19
Grab the one that just came off the truck
🔄 Click to see term
Term1/19
Which order should pallets be loaded when multi stops
🔄 Click to see definition
Definition1/19
Load the last drop off first
🔄 Click to see term
Term1/19
When loading and or unloading in rainy weather what is the best method used to make the wet floor safer
🔄 Click to see definition
Definition1/19
sand
🔄 Click to see term
Term1/19
When traveling with an empty forklift you should always keep the fork in what position
🔄 Click to see definition
Definition1/19
Behind you
🔄 Click to see term
🥳
Great job!
You studied all the cards in this guide.
Rate this guide:
☆★☆★☆★☆★☆★
Start overPrint
Full screen
Rate this Study Guide:
☆★☆★☆★☆★☆★
Cards in this guide (19)
How should a narrow aisle lift stop when you release the dead mans pedal
Very quickly
In which order should pallets be staged for ease of loading when pulling a multi-stop load
the smaller pallets in first
When putting away or stocking recently dated freight what should be done with the older existing freight that is already there
When putting away or stocking recently dated freight, what
should be done with the older existing freight that is already
there
What is difference between floating load and ground load
In case of grounded load load is grounded and voltage is
measured across it.
while in case of floating load load is not grounded instead it
is connected in feedback circuit.
When building a pallet to be shipped over the road how should the cases be placed on the pallet
they should be placed with the small cases on the bottom and the
larger ones on top.
When putting away pallets of freight into multiple dept drive in bays what level of racking should be stocked first
top to bottom
What should be done to differentiate one inbound load from the another
Assign a different number to each... no?
What has to be verified as intact before the doors of an inbound trailer are opened
The break lights.
How should the work-to-complete outbound deliveries be prioritized
By the product
What should you always check before entering a trailer docked
Before entering a trailer dock, you should verify that your
light wheels are docked.
What can be done if a trailer is overweight in the tail
If a trailer is overweight in the tail, one way of solving the
problem is to reload the trailer so that the weight is commonly
distributed. If this is not an option, finding a more suitable
vehicle to pull the load is an alternative solution.
After Recording The Damage Encountered In A Load What Should Be Done With The Damaged Cases
mark them as damaged report it to a supervisor
When unloading a trailer and damage is discovered what should be done
Write it down!
How many standard pallet spots can be loaded into a 48 foot trailer
24
What are the four major load control fonction found on a load lift
Inspirations
Assemble bills with date sensitive product how should you go about getting the correct cases
Grab the one that just came off the truck
Which order should pallets be loaded when multi stops
Load the last drop off first
When loading and or unloading in rainy weather what is the best method used to make the wet floor safer
sand
When traveling with an empty forklift you should always keep the fork in what position