answersLogoWhite

0

The glass ionomer power, and water of cause and a spatula metal. Top tip is use a glass mixing slab gently warmed under hot water. Mad i know you would think it would set quicker but it doesn't. Oh and practice when the principle is out!Alternitevely buy the pre capulated stuff it never fails and if it does it isn't the nurses fault!

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

Why agate spatula is used for mixing glass ionomer cement?

Agate spatulas are used for mixing glass ionomer cement because they do not react with the cement ingredients, ensuring that the material remains uncontaminated. This helps to maintain the properties and performance of the cement. Agate spatulas are also non-reactive and do not scratch the glass slab used for mixing, preventing any impurities from entering the mix.


Why agate spatula is used in glass ionomer cements?

Agate spatulas are used with glass ionomer cements because their non-reactive surface prevents any interference with the setting reaction of the cement. This helps to preserve the properties of the cement and ensures an accurate mix. Agate spatulas also do not scratch or damage the glass slab used for mixing the cement.


Why folding motion is used for gic?

The folding motion in Glass Ionomer Cement (GIC) application is used to remove excess material and to ensure proper adaptation of the cement to the tooth surface. This motion helps create a homogenous mix and reduces air entrapment, improving the mechanical properties and bond strength of the cement.


Why glass ionomer mixed with agate spatula?

Glass ionomer is mixed with an agate spatula because the agate spatula is non-reactive and does not introduce any contaminants that could interfere with the setting reaction of the glass ionomer. This ensures that the material sets properly and maintains its desired properties. Additionally, the smooth surface of the agate spatula helps in achieving a homogeneous mix without introducing air bubbles.


What do you mix with glass on doodle god?

You mix house+glass=skyscraper to make house is to bricks+cement =house


Why does white mortar joints in glass block look gray not white?

It depends on the ratio of cement in the mix. If it is white then there is no cement in it and it will not bond the blocks together


Why mix GIC use plastcic spatula?

Mixing Glass Ionomer Cement (GIC) with a plastic spatula is recommended to prevent contamination and preserve the material's properties. Metal spatulas can react with the acidic components of GIC, potentially compromising its setting and adhesion qualities. Additionally, a plastic spatula allows for a more thorough and even mixing of the components, ensuring optimal performance when applied.


Mix 1 part cement with 4 parts sand how much sand do you need for 2 kilos of cement?

8 kilos sand to the 2 kilos cement.


How can I create a cement mold DIY project?

To create a cement mold DIY project, you will need a mold, cement mix, water, mixing tools, and a release agent. First, prepare the mold by applying the release agent to prevent sticking. Then, mix the cement with water according to the instructions on the package. Pour the cement into the mold and smooth the surface. Allow the cement to cure for the recommended time before removing it from the mold. You can customize your project by adding color or decorations to the cement mix before pouring.


How much sand do you need for concrete?

A good mix is four or five of sand to one of cement.


How many 20 kg bags of cement will you need to mix with 13 cubic meters of sand if you want to mix at a ratio of 8 sand to 1 cement?

If a 20kg bag of cement=0.1m3 with 100 lots o 0.01 to 1m3 then you will need 12.5 bags per m3. So you need approx 11.5m3 of sand and 144 bags of cement (144 x 0.01 = 1.44m3) to give you a total of 12.94m3


How many 94 lb. bag cement need to mix 1 yard concrete?

To mix 1 cubic yard of concrete, you typically need about 5.5 to 6 bags of 94 lb. cement. This is based on a standard concrete mix ratio of 1 part cement, 2 parts sand, and 3 parts gravel. The exact number may vary slightly depending on the specific mix design and desired strength of the concrete.