0
What else can I help you with?
How do you change a chain on a 2002 YZF 600R?
there should be a master link with a clip. with a screw driver try to take the clip off and pop off the master link,try to have bike in neutral with rear tire off the ground. it is really hard to get the clip off the link sometimes and you might poke a few holes in your hand trying. My chains are always riveted on for racing and I always use a grinder to cut my chains off. So if you can not get the clip off the master link use a grinder. there should be a master link with a clip. with a screw driver try to take the clip off and pop off the master link,try to have bike in neutral with rear tire off the ground. it is really hard to get the clip off the link sometimes and you might poke a few holes in your hand trying. My chains are always riveted on for racing and I always use a grinder to cut my chains off. So if you can not get the clip off the master link use a grinder.
How do you replace a headlight bulb on a C240?
You can change it yourself.. not really that hard.. Open the hood then look on the engine side of the headlight. There is a black cover that removes by moving the clip. Then remove the wire from the bulb. next, there is a metal clip. It is a little hard to get the clip off but once you get it off it is very easy.. Just remove the clip then take out old bulb and replace.
How does the paper clip work?
you clip stuff together.
Does a Raider clip work in a Recon?
Yes it will because the Raider is a Clip-System blaster like the Recon, so every Clip-System clip made will work with both blasters.
You have a 96 s10 and im trying to get the door pannel off and the window crank wont come off how do you take the crank off?
Push the panel with your hand to expose a spring clip on the backside of handle. There is a special tool to remove this ,but a small flat blade screwdriver will work. Push out the clip and the handle will come off. When you are ready to replace the handle, start the clip onto the handle half-way so all you have to do when the handle is in place is to tap the clip and it will snap in place.
Can the raider cs 35 clip work in the long shot and the recon?
yes it can work with any clip feed gun
How do you get just the sound off a youtube clip and put it with your own film?
Well this is really hard to do unless you are really skiled with computers. The reason it is so hard is because the clip off of Youtube is a video that you're trying to put in your own video. I personally have never done it and Im still good with computers. My advice would instead off getting the sound of Youtube just Google it and download the sound and add it.
How do you get the fuel injector wires off a new beetle 18 Turbo cant figure out the clips?
if it is the ones with a metal clip the you would pry (lightly) on the middle of the plastic clip to work your screwdriver underneth the metal clip retainer..it slides out and releases the plug. to re-assemble simply slide the clip back in and re-install the plug.
What type of clip is used to secure copper pipe work in notched 1st floor joist?
A 'P' clip or a 'Talon' clip.
How you know if the tubal ligation clip fell off?
they did an exray and found that my right clip fell off my tubiligation should I be worried?
How do you put the clip on the pokewalker?
You unscrew the original back of the pokewalker OFF of the pokewalker, then replace it with the back with the clip.
Does magic fabric really work?
not for me, it fell off right away
