how do I remove my air bag from my mercury sable
First pull the fuse to the air bags then remove the rubber cover on the stearing wheel. You will then see 4 to 6 bolts to remove the air bag and the air bag mounting bracket. After removing the bolts you will then need to unclip the air bag connector and then you will be able to remove the airbag. Then you will see a nut on the stearing will shaft, remove it and then you will need a wheel-puller to remove the stearing wheel due to the fact that it is pressed on. First pull the fuse to the air bags then remove the rubber cover on the stearing wheel. You will then see 4 to 6 bolts to remove the air bag and the air bag mounting bracket. After removing the bolts you will then need to unclip the air bag connector and then you will be able to remove the airbag. Then you will see a nut on the stearing will shaft, remove it and then you will need a wheel-puller to remove the stearing wheel due to the fact that it is pressed on.
You have to remove the spring clip from the solenoid valve on the air bag and turn it left, which will bleed the air out of that air bag you have to do this to each air bag individualy.
you remove it
disconnect battery, remove air bag fuse and yellow arming wire to each air bag you are disconnecting.Be Carefull !
Under the air bag. First remove air bag and one clip will be holding module into column
It is illegal to remove the air bag from any vehicle.
It is illegal to remove the air bag from any vehicle.
You take it out
To remove silicone caulk from clothing, you can try freezing the garment in a plastic bag to make the caulk brittle and easier to remove. Once frozen, gently scrape off as much caulk as possible with a blunt tool, then treat any remaining residue with a commercial solvent like a silicone caulk remover or rubbing alcohol. Finally, launder the garment according to its care instructions.
Disconnect the negative battery terminal and remove the fuses pertaining to the air-bag(s)
how do you remove the SRS?