You can purchase an adaptor or just cut the French plug off and wire an America plug on the end of the wires. You will also have to change the bulb as the French bulb operates on 220 volts not 110 like the U.S.
It means the wire for the plug comes out right at the bulb socket, as opposed to running down the lamp internally and exiting at the base...
The wire on a lamp cord that is known as the hot wire is typically the black wire.
No, you cannot put a 28w 2D lamp into a 16w 2D fitting. The wattage of the lamp should not exceed the maximum wattage that the fitting is designed for, as it can lead to overheating and potential safety hazards. It is important to always match the wattage of the lamp to the specifications of the fitting to ensure proper functionality and safety.
The cord is attached under the shade and runs outside the lamp along the back
To replace a shade on a lamp, first, remove the old shade by unscrewing or unclipping it from the lamp. Then, measure the diameter of the lamp's fitting to ensure the new shade will fit properly. Finally, attach the new shade by securing it onto the lamp's fitting, making sure it is stable and secure.
The wire that is hot on a lamp cord is typically the one that is black or red in color.
The lamp wire is hot because electrical current flowing through it encounters resistance, which causes the wire to heat up.
eHow is a great resource for topics like this, with articles like "How to Re-Wire a Lamp," "How to Rewire a Lamp with a Rotary Switch," "How to Rewire an Old Lamp," and "How to Wire a Floor Lamp."
mains plug
If you are asking about the electrical cord on a lamp, the black wire with the white stripe is the neutral conductor.
For a 125V lamp socket, it is recommended to use 18 or 16 gauge wire. This wire gauge ensures proper electrical conductivity and safety for the lamp's voltage requirements. Always consult the lamp's manufacturer or a qualified electrician for specific recommendations.
The grooved wire is the neutral wire, which carries the current back to the power source. The smooth wire is the hot wire, which carries the current from the power source to the device, in this case, the lamp. It's important to connect them correctly to ensure the lamp functions properly and safely.