0
What else can I help you with?
If a resistive force torque is 200 pound-inches and fa equals 4 inches what F equal in the following equation 200 pound-inches equals F x4 inches?
the answer is 50 pounds.
What is the valve cover torque for the 5.9 dodge?
95 ft inches of torque , make sure it is in ft inches of torque and not ft lbs.
Which torque is absent in energy meter why?
The torque absent in an energy meter is the viscous torque. This type of torque is not present because energy meters are designed to measure the energy consumed or generated by a system, and viscous torque is a resistive torque generated due to viscous fluid flow which does not contribute to the energy measurement.
What value would be indicated on the scale of a 20 inch torque wrench equipped with a 12 inch linear extension when the wrench is actually delivering 80 lb ft of torque?
M1 = M2 x L1 / L2M1 is the torque setting of the wrench.M2 is the actual torque applied to the nutL1 is the normal length of the wrenchL2 is the extended length of the wrench (Length of wrench + length of adapter)Remember... Torque = Force x Radius
How torque amplifier works?
A torque multiplier increases the torque by increasing the length from which a bolt or nut is turned. This process is referred to as "mechanical advantage."
What is the torque force if you are turning a wrench that is 55cm long and you are using 15N of force?
torque = force * lever length torque = 15 * 55 torque = 825 n-cms
How is it possible for a smaller force to hava a large torque?
Yes, it is possible for a smaller force to have a large torque because it is usually located at a much greater distance from the center of rotation. Torque is calculated by multiplying the distance by the force.
How may the torque of a given force be increased?
To increase the torque of a given force, you can increase the distance from the pivot point (lever arm). This is because torque is the product of force and lever arm length. Increasing either the force or the lever arm length will increase the torque.
Is 150 pound-feet of torque much different from 100 pound-feet?
for a given lever length the force is (150 / 100) times greater torque = force (pounds) * lever length (feet)
How does the length of a wrench affect your force?
The length of a wrench amplifies the torque you can generate with the same amount of force. A longer wrench provides more leverage, making it easier to apply force and generate more torque to loosen or tighten a fastener. Conversely, a shorter wrench requires more force to achieve the same torque.
What is the torque acting on the pendulum of length L inclined at an angle?
The torque acting on a pendulum of length L inclined at an angle is given by the product of the gravitational force mg acting at the center of mass and the perpendicular distance from the point of rotation to the line of action of the force, which is L sin(θ), where θ is the angle of inclination. The torque τ = mgL sin(θ).
What is the difference between breakaway torque and rotational torque?
Breakaway torque is the torque required to start the initial movement, in the loosening direction, of a bolt, screw, or nut from its (non−loaded) at rest position with the locking element engaged. Tightening torque is the torque necessary to move the bolt, screw, or nut along its threaded length in the tightening direction.
