Check the governor where it contacts into the engine for freeness. Clean all the sludge around the area and spray a little WD40. Also inspect the linkage for sludge or bends that might be causing the governor to stick open.
To fix a sticking float on an 18hp Briggs & Stratton engine, first remove the carburetor and inspect the float and needle for dirt or damage. Clean the carburetor thoroughly with carburetor cleaner, ensuring all passages are clear. Check the float for proper movement; if it's damaged or heavy with fuel, replace it. Reassemble the carburetor, making sure the float and needle seat properly, and then reinstall it on the engine.
this question is not clear what hose? on what engine
10-28-09 What the heck is 6.02 oil? A safe bet is always SAE straight 30 weight, heavy duty. Detergent is ok. Briggs synthetic 5w30 is best, but expensive. Using 5w30 or 10w30 auto oil is iffy, it doesn't handle heat very well. If you must, make sure your engine is well ventilated and clear of debris. It will also void your warranty in a high temp application...
disconnect battery for one mi.
golden clear not black
After repairing the cause of the code, you clear the code with a scan tool.
If you have an AutoZone nearby, they will clear it for free.
I clear the check engine light with a Scangauge II. But most ODB-II devices can read and clear the code.
Trying to clear the check engine light in a Kia Sorento yourself is not recommended. The check engine light could indicate a serious problem and the car should be inspected by someone qualified.
"Engine diagram" is not clear. Google has a lot of resources.
Your question is not clear...
It is a processing engine for better picture quality commonly used in Slyvania HDTV collection.