0
Yes, the 1985 Honda FourTrax models, such as the TRX125 and TRX200, are equipped with a clutch cable. This cable connects the clutch lever to the clutch mechanism, allowing the rider to engage and disengage the clutch for shifting gears. However, the specific configuration may vary depending on the model, so it's essential to refer to the owner's manual for detailed information.
What else can I help you with?
How much did a 1985 Honda fourtrax 250 cost new?
A 1985 Honda fourtrax 250 cost $ 2150.00 brand new. I bought one in June of '85
How do you change the clutch cable on an 1985 mr2 na?
You have a hydraulic clutch in your mr2, no cable.
Where is clutch slave cylinder on 1985 Honda Prelude to fill?
hi, you may find that it dose not have a clutch cylinder, as this model usually has a cable. confirm this by following thru from top of clutch pedal. regards razzel
How do you adjust the clutch on a 1985 Honda CRX?
To adjust the clutch on a 1985 Honda CRX, first locate the clutch cable adjuster near the firewall. Loosen the lock nut and turn the adjuster to either tighten or loosen the cable tension, ensuring there’s about 0.5 to 1 inch of free play at the pedal. After adjusting, tighten the lock nut and test the clutch operation to ensure smooth engagement. If necessary, repeat the adjustment for optimal performance.
How do you adjust clutch 1985 Honda CRX?
To adjust the clutch on a 1985 Honda CRX, first, locate the clutch cable adjustment nut near the clutch pedal. Loosen the lock nut and turn the adjustment nut to either increase or decrease the cable tension, ensuring there's about 1/2 inch of free play at the pedal. After making adjustments, tighten the lock nut and test the clutch engagement to ensure it's smooth. If necessary, repeat the adjustments until the desired feel is achieved.
How much is a 1985 fourtrax 250 Honda ATV worth?
Depending on the shape.. I would say about $500 Joe
How good is the 1985 Honda fourtrax 250 ATV?
old school you could take that bike through anything
Is a 1985 Honda fourtrax 250 starter reduction gears compatible with an 86 or 87 Honda fourtrax 250 starter reduction gears?
The starter reduction gears from a 1985 Honda FourTrax 250 are generally not compatible with the 1986 or 1987 models due to differences in design and specifications. While the overall engine and transmission may appear similar, manufacturers often make subtle revisions that can affect part compatibility. It's best to consult a parts manual or a dealership to confirm compatibility before making any replacements.
How do you replace a clutch cable in a 1985 Jeep CJ-7?
Easy, there's no such thing.
What is the capacity and viscosity of oil for a 1985 Honda Fourtrax 250?
AnySE /SF rated10w30 or 10w40 (4 stroke motorcycle oil preferred). Holds about 2 litres...
Where is the Timing mark on a 1985 Honda fourtrax fourwheeler?
On a 1985 Honda FourTrax, the timing mark is typically located on the flywheel or the engine's timing cover. You may need to remove the left side engine cover to access the flywheel. The timing mark is usually a notch or a line on the flywheel, which aligns with a corresponding mark on the engine case to set the timing correctly. Always refer to the service manual for specific details and procedures.
What are the Timing marks for a 1985 Honda fourtrax four wheeler?
For a 1985 Honda FourTrax, the timing marks are typically located on the crankshaft and the camshaft. When setting the timing, align the marks on the crankshaft with the mark on the engine case at the TDC (top dead center) position. Additionally, ensure that the camshaft timing mark is aligned with the corresponding mark on the cylinder head. Always refer to the service manual for specific alignment details and procedures.
