0
What else can I help you with?
How do you tell if a lawn mower is a gas only or a gas oil engine?
A gas only engine has a spout where oil is added to the engine. If there is no spout, then it is a gas/oil engine. FYI - gas only engine is a four-stroke (four-cycle) engine and the gas/oil engine is two-stroke (two-cycle).
What is the oil to gas ratio for 4 cycle engine?
A four cycle engine does not use a gas/oil mixture. The oil is in the crankcase and the gas goes in the gas tank. If you put oil in the gas on a 4 cycle engine it will run poorly and smoke a lot.
What if you put diesel in a gas engine?
The engine would stop running. You would need to drain the gas tank. If the engine has been allowed to run since the diesel was added you would also need to drain the fuel line.
Why do you have to mix oil and gas?
An engine needs lubrication to reduce friction and prevent overheating of the internal parts. Oil is added to the gasoline in a 2-cycle engine because this type of engine does not have an oil reservoir.
Why does a two cycle engine require more oil than a 4 cycle engine?
Because a 2 Cycle Engine burns the oil in the gas, and in a 4 cycle engine, it sits in the oil pan, and it isn't supposed to burn it at all.
Does a 190cc engine need oil added to the gas?
Pretty sure that's a 4 stroke and you have a separate place for your oil.
Do you add oil to the gas of your Sears snowblower?
That would depend on whether the engine is 2-stroke or 4-stroke (aka 2-cycle & 4-cycle). If the engine does not have an oil filler tube, it is a 2-stroke and oil must be added to the fuel. If it has an oil filler tube, it is a 4-stroke and oil is added through the filler tube.
What is carnot engine in thermodynamics?
A Carnot cycle representes a gas undergoing a theoretical - means it cannot be implemented realistically - thermodynamic cycle composed of 4 reversible steps (meaning you can go back and everything will be back to the state it was, or scientifically speaking, the entropy of the universe will remain constant): 1- isothermal expansion of the gas (working fluid) - heat is added from the surroundings to the working fuild and it expands at constant temperature; 2- isentropic expansion of the gas - the gas is allowed to expand and produce work; 3- isothermal compression of the gas - the gas rejects heat to the surroundings at constant temperature; 4- isentropic compression of the gas - the gas is compressed and work is need for that compression.
Does a troy-built 21 inch cutting blade 190cc 6.75 need an oil and gas mix?
A Troy-Bilt 21 inch cutting blade 190cc 6.7 HP engine does not need an oil and gas mix. It is a 4 cycle engine which keeps the oil and gas separate for maximum efficiency.
Does an outboard motor have intake and exhaust valves?
If it's a two cycle engine that mixes oil with gas, no. If it's a four cycle engine, yes.
Can you use motor oil in push mower?
If it is a 4-cycle engine you definitely need motor oil. If its a 2-cycle engine then the oil is mixed with the gas. If its a reel mower then no oil is needed except for external lubrication. Depending on the engine manufacturer the 4-cycle engines will require either SAE30 or 10w30 motor oil.
What kind of gas do you use for a Honda xr80r 2-cycle or regular gas?
regular gas xr is a 4stroke engine
