0
What else can I help you with?
How do you set timing chain in a 1985 Honda 200 atc?
line up the timing marks on the flywheel and cam
How do you adjust cam chain on TTR 125?
The way to adjust cam chain on TTR 125 is by putting the chain on the cam sprocket and making sure that it is the same. You can also remove and reset it as well.
How do you adjust cam chain on Yamaha sr125?
How to adjust timing chain Yamaha sr125
2001 400ex and you need to no how to adjust the cam chain tensioner?
I believe the cam chain tensioner on the 400ex is automatic, as with most if not all of the newer quads.
What is the org site for 49cc roketa scooter how to adjust rocker arms?
how do I adjust the cam timing chain
How do you adjust the timing chain tension on a 1998 Saturn SL2?
you can't : On the '97 Twin cam engine the cam chain tensioner depends on oil pressure. I had a problem that with 200,000 miles the chain had stretched farther than the tensioner could handle and had to replace the cam chain.
How can you adjust timing chain on 325 magnum?
how can you use the cam tensioner on a 325 magnum
How do you adjust cam chain tensioner on 2000 Harley Sportster?
No Harley Sportster has ever had a cam chain. The camshafts are gear driven, directly off the crank. No tension adjustment required.
How do you adjust timing chain on a Honda xr600?
You cannot adjust the tensioner. It is automatic, and takes out the slack of a stretching/aging cam chain. Once the tensioner has fully extended, the only fix is to replace the chain and the part of the tensioner the chain rides on if it is worn.
How do you adjust cam chain on Yamaha yfm225?
You don't. The YFM225 uses an automatic chain tensioner that helps to take up the slack on the cam chain. If you are getting chain slap, then either the chain is stretched or the tensioner is not functioning correctly. In both cases, the parts should be replaced. You cannot repair a non-functioning auto tensioner, nor can you remove links from a stretched cam chain.
How do you adjust cam chain on xr250?
The cam chain on xr250's are adjusted automaticly by a mechanism inside the engine, so there is no way to manually tighten it. If your engine is making a rattling sound, then your cam chain may need replacing as they do wear out over time which makes them longer
How do you adjust xl350 cam chain?
To adjust the cam chain on an XL350, first, ensure the engine is cool and disconnect the battery. Remove the timing cover and check the cam chain tensioner; if it's too loose, adjust the tensioner according to the manufacturer's specifications, typically by turning the adjustment screw or bolt. After adjustment, rotate the engine by hand to ensure there is no binding, then reassemble the timing cover and reconnect the battery. Always refer to the service manual for specific torque settings and procedures.
