To remove the seat on a Kawasaki Bayou 250 four-wheeler, first locate the securing bolts or clips at the back or sides of the seat. Use a wrench or screwdriver to remove these fasteners. Once they are removed, gently lift the seat upward and back to detach it from the frame. Be sure to store the bolts or clips in a safe place for reinstallation.
look on the back of your 4 wheeler you will see the muffler on the left there will be a looped wire pull and then lift the seat at the same time
How do you remove seat off Kawasaki nomad
The Kawasaki ATV fuse box is located beneath the seat. Lift the seat up and the fuse box will be visible.
1993 kawasaki voyager motorcycle how do you remove the driver seat?
The fuse on a Kawasaki Bayou is typically located in the fuse box, which is usually found under the seat or near the battery compartment. To access it, you'll need to remove the seat or side panel. Check the owner's manual for the specific location and details on the fuse ratings to ensure you replace it correctly if needed. Always ensure the ATV is turned off before attempting any maintenance.
there are two bolts in the back of the seat. remove them and then slide the seat back about an inch and remove
with your hands.
The fuse is located under the seat adjacent to the battery. It is a 30 amp fuse.
Remove drivers seat by lifting tab on front of seat.
pop off seat for kawasaski mojave 250cc1989-2005
remove the passenger pad first, when removed it uncovers screws on the rear of the drivers seat. Remove these and it comes off.
It is underneath the seat, to remove the seat there is a release under the back above the taillight. Remove the seat, and the battery is right there.