0
The Kawasaki Mule 610 typically requires about 2.5 quarts (2.4 liters) of oil when changing the oil and oil filter. Always refer to the owner's manual for the most accurate specifications and recommendations for your specific model, as oil capacity can vary slightly based on production year and any modifications. It's also important to use the recommended oil type for optimal performance.
What else can I help you with?
How do you adjust the drive belt on a 610 kawasaki mule?
Take it to your nearest certified Kawasaki dealer...
What type of oil to use for kawasaki 610 mule?
The recommended type of oil to use for a Kawasaki 610 Mule is API SF. Th610 Mule will hold approximately 1.5 quarts of oil.
What weight oil for kawasaki 610 mule?
20w 50
Where is the oil dipstick on a kawasaki mule 610?
The oil dipstick, on your Kawasaki Mule 610, can be found on the right side of the engine. The top to the oil dipstick should be colored black.
What is the oil capacity of a Kawasaki mule 610 motor?
I have a 2007 Mule 4x4 610 and the oil capacity is 1.5 U.S. quarts. (1.4 L.)
How often do you have to change the oil on Kawasaki Mule 610?
An oil change should be done according to mileage and not necessarily time changes. You can give the Kawasaki Mule 610 an oil change after every 10,000 kilometers.
What is the spark plug replacement for kawasaki mule 610?
NGK spark plug part number BPR5ES
What oil filter is for a Kawasaki mule 610 2009?
For a 2009 Kawasaki Mule 610, the recommended oil filter is the Kawasaki part number 49065-7007. It's important to use the correct filter to ensure optimal engine performance and protection. Always check your owner’s manual or consult a dealer for the most accurate information regarding maintenance parts.
What is the oil filter replacement for a kawasaki mule 610?
NAPA 1394 Hi Flo 128 Fram PH 4967
How much oil does a kawasaki 610 mule hold?
The Kawasaki 610 holds 1.5 US qt in a completely dry engine. You should never overfill the motor oil. You can check the motor oil with the motor oil dipstick. 1.37 Qt if changing oil and and removing filter. 1.1 us qt if your not removing filter. this is straight from the Kawasaki mule dealer mechanic guide. and on a normal oil change with filter removed its barley over 1 QT.
Why would there be gas in the oil of your Kawasaki Mule 610?
could it be pressure on tank due to unvented gas cap? try running with vented cap.
Where is the spark plug on a mule 610?
Ah, the spark plug on a Mule 610 can usually be found near the engine, underneath a small cover. It's like a little hidden gem waiting to be discovered. Just gently remove the cover, and you'll see the spark plug shining like a tiny beacon of light ready to keep your Mule running smoothly.
