NAPA 1394
Hi Flo 128
Fram PH 4967
NGK spark plug part number BPR5ES
The recommended type of oil to use for a Kawasaki 610 Mule is API SF. Th610 Mule will hold approximately 1.5 quarts of oil.
20w 50
The oil dipstick, on your Kawasaki Mule 610, can be found on the right side of the engine. The top to the oil dipstick should be colored black.
Take it to your nearest certified Kawasaki dealer...
I have a 2007 Mule 4x4 610 and the oil capacity is 1.5 U.S. quarts. (1.4 L.)
On a Kawasaki Mule 610, the oil filter is typically located on the engine, near the oil pan. To access it, you may need to lift the seat or remove the panel covering the engine compartment. Always refer to the owner's manual for specific details and maintenance instructions.
The Kawasaki 610 holds 1.5 US qt in a completely dry engine. You should never overfill the motor oil. You can check the motor oil with the motor oil dipstick. 1.37 Qt if changing oil and and removing filter. 1.1 us qt if your not removing filter. this is straight from the Kawasaki mule dealer mechanic guide. and on a normal oil change with filter removed its barley over 1 QT.
An oil change should be done according to mileage and not necessarily time changes. You can give the Kawasaki Mule 610 an oil change after every 10,000 kilometers.
could it be pressure on tank due to unvented gas cap? try running with vented cap.
Ah, the spark plug on a Mule 610 can usually be found near the engine, underneath a small cover. It's like a little hidden gem waiting to be discovered. Just gently remove the cover, and you'll see the spark plug shining like a tiny beacon of light ready to keep your Mule running smoothly.
The spark plug gap for a Kawasaki Mule 610 typically ranges from 0.028 to 0.032 inches (0.7 to 0.8 mm). It's essential to check the owner's manual or service manual for the exact specification, as it may vary slightly based on the model year. Always ensure the gap is set correctly for optimal engine performance.