0
What else can I help you with?
What causes a 2004 Honda accord ex to make a metal-to-metal squeal when turning or curving left?
bad brakes.
Squeal from front wheel on 1994 Nissan pickup when driving at low speeds?
time for brakes,hurry that metal on metal makes my ears hurt.
What was the first Harley Davidson carburetor made of?
Metal/steel
How can Harley Davidson decals be removed from metal?
Harley Davidson decals can be removed from metal using metal wire or fishing line. Move the wire back and forth under the decal until it comes loose and can be pulled off.
I had new brakes rotors and calipers and the brakes are squeling now.The garage said my brakes where to hard and they had metal in them they sanded them.Still squeling What could be the cause.?
first of all, the pads may be semi-metallic and have chunks of metal in them which may cause the squeal, change to a less metallic pad may help, also the backing of the pads should have an anti-squeal gel applied to them, when you apply the brakes, the pads will hyper vibrate and can cause a squeal. The gel will stop the vibrating. first of all, the pads may be semi-metallic and have chunks of metal in them which may cause the squeal, change to a less metallic pad may help, also the backing of the pads should have an anti-squeal gel applied to them, when you apply the brakes, the pads will hyper vibrate and can cause a squeal. The gel will stop the vibrating.
Why do the wheels squeal on a train when going through a curve?
Centrifugal force is pulling the train's metal wheels against the sides of the metal train tracks, creating friction. Metal on metal makes a horrible noise.
Why do water pipes squeal?
The reason a water pipe squeals is because of the water rubbing against the metal of the pipe.
Do harmonic balancers squeal when they are bad?
Yes they can squeal when the rubber to metal bond has been broken, the metal ring then moves over the rubber making a loud squeal. If that is the case it can sound much like a pending bearing failure on the alternator or water pump. This also means that your balancer can potentially fly apart at any moment and cause severe damage to the radiator or crankshaft sensor (if equipped). Also when the metal belt pulley does eventually slip off it will no longer be driving all the pulleys.
What do you do if your 95 Cadillac Sedan deVille stopped squeaking when the rear brake calipers were replaced but then the squeak started again?
I assume you replaced the pads also. Some metallic pads have a tendency to squeal. Replace them with a non metallic pad. Usually a cheap pad will not squeal but will not last as long. You may also want to try applying some anti squeal paste to the back side of the pads and metal to metal contact points.
What causes a squeal noise from hyandi sonata?
Squealing from the engine (ie; it alters according to revs applied) would suggest a belt is slipping somewhere. Squealing that varies according to road speed suggests that the is metal contacting on metal. If it is when you brake, I know that some Korean cars have brake pads that squeal when they are worn to the point of replacement. I had that happen to me on a Kia once, and it scared me witless to start with!
What where the primary materials used for the empire state building?
cement, metal and hold metal together
Do your brakes make a noise if you get new calipers?
If new pads came with your new calipers, they can squeal a bit until they 'run in'. If you didn't replace your rotors or have them re-surfaced, they can quickly destroy your new pads causing metal-to-metal grinding.
