There is one bolt on the bottom of the oil tank. The oil tank is located near the header pipe up front.
There is also 2 horizontally mounted drain bolts on the bottom of the motor itself under the plastic OEM skid plate. Be careful and take your time, the 2 bottom ones tend to strip often!
Remove the Suzuki 450 oil pan plug. Allow the oil to drain out of the oil pan. Replace the plug to the oil pan. Fill the motor with oil.
The Suzuki oil drain plug torque specification is 30 pounds. Over tightening the oil drain plug can cause the oil pan threads to strip.
it is the only one on the oil pan.
remove the drain plug between the exhaust under the motor
17mm
its under the engine
It is the plug with the number 4 written on on the very bottom of the crankcase.
The transmission fill plug on a 2000 Suzuki Alto is behind the drain plug. Both the plugs are located underneath the transmission.
jack the back of the bike up and remove the oil plug!
On a 1991 Suzuki Intruder 750, the oil drain plug is located on the bottom of the engine's oil pan. It is typically a hexagonal-shaped bolt that can be accessed from beneath the motorcycle. Make sure to place a drain pan underneath to catch the old oil when you remove the plug. Always consult the owner's manual for specific details and torque specifications when re-installing the plug.
If you cant figure that out you dont need a bike!
Bottom of Oil Pan.Cheers Joseph