the jets are inside the carburetor. They look like brass pipes, they can be unscrewed. The jets have to be clean (the hole has to run all the way through the jet) in order for the engine to run.
The are on the left portion of the carburetor.
function of jet in carburettor
In your carburetor. You have a main jet and an idle jet.
primary jet size 105 secondary jet size 150
choke, throttle, jet
To remove a stripped jet from a carburetor, you can use a screw extractor or an easy-out tool designed for this purpose. First, apply penetrating oil to the area and let it sit for a few minutes. If the jet is still stuck, carefully drill a small hole in the center of the jet, then insert the extractor and turn it counterclockwise to remove the jet. If these methods fail, you may need to consider a drill and tap solution or replacing the carburetor.
quadra-jet
a rochester quadra jet
The primary jet of a standard carburetor for the Toyota 4K engine is typically located inside the carburetor body, specifically in the float chamber or the main body of the carburetor. It is responsible for delivering the fuel mixture to the engine during normal operation. Accessing it usually requires disassembling the carburetor for cleaning or replacement. Always refer to the specific service manual for detailed instructions related to your carburetor model.
to put a bigger main jet, to put more gas to the engine. take the carburetor off. on the bottom are three screws you need to take off. then the carburetor comes in two. the biggest screw head at the top of the brass things, is the main jet. it comes out of the pilot jet, which comes out of the carb if you unscrew it. take out the main jet and put a bigger main jet in. you'll also want a free flow exhaust and free flow muffler.
Yes, an electronically controlled Rochester Quadra-Jet
80 100