On a Suzuki Intruder, the air cleaner drain plug is typically located on the bottom of the air cleaner housing. It is a small rubber plug that can be removed to allow any accumulated moisture or debris to drain out. Ensure to check your specific model's service manual for exact location and maintenance instructions, as it may vary slightly between different models and years.
On a 1991 Suzuki Intruder 750, the oil drain plug is located on the bottom of the engine's oil pan. It is typically a hexagonal-shaped bolt that can be accessed from beneath the motorcycle. Make sure to place a drain pan underneath to catch the old oil when you remove the plug. Always consult the owner's manual for specific details and torque specifications when re-installing the plug.
The spark plug gap on a 1999 Suzuki Intruder 1500 is 0.035 inch. This is a common spark plug gap size for motorcycles.
.035
About .035 iches
The Suzuki oil drain plug torque specification is 30 pounds. Over tightening the oil drain plug can cause the oil pan threads to strip.
remove the right side engine cover
not sure but i would set it at 28
The size of your mom
.031...From the 1996 Intruder 800 manual, .8-.9MM, which is more like .035.....
remove the drain plug between the exhaust under the motor
the 1400 intruder didnt come out till 1987. nevertheless its at the back of the engine right near the battery box.
Drain cleaner removes clogs and prevents messy overflows from sink and bathtub drains. One affordable drain cleaner contains ingredients found in any home pantry. To use this environmentally friendly cleaner, remove the plug from the drain. Measure _ cups of dry baking soda into the drain. Add _ cups of vinegar, and replace the plug to allow the resulting chemical reaction to work. After 30 minutes, remove the plug and carefully pour boiling water into the drain to complete this effective drain cleaner method.